4643 - Parts

This is an ignition switch designed for various lawn tractor models. The ignition switch is the direct interface for starting and stopping the engine. When the key is turned, it sends power through its terminals to the ignition coil, creating a spark that ignites the fuel in the engine and starts it. Over time, the ignition switch can wea...Read morer out from frequent use and may also corrode, leading to partial or complete failure, and preventing the engine from starting. This ignition switch is sold as an individual OEM part and does not include any additional seals or accessories. Replacing this switch requires basic tools such as a screwdriver, pliers, and a wrench. To replace it, simply disconnect and remove the old switch, along with any seals, nuts, or connectors. You can also test the switch using a multimeter to check for continuity before replacing it. To install the new switch, connect it to the same location as the old one and secure it in place.

This durable pedal is an OEM direct from Murray which was designed for use with lawn tractors. Pedals can become worn down over time, requiring replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. This part is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Genuine Char-Broil replacement part, this item is sold individually. The Carryover tube provides support burners, and carries the flame from one burner to the next. They also help keep the burners securely in place. Over time, your carryover tubes may rust or warp. This would be the time to replace them.

This part is available individually and is made of plastic and metal. The limit switch connects to the interlock and helps to turn off the engine if there is a problem. A wrench might be required during the replacement of this part. It will require replacing if it becomes broken. This is a Murray, Snapper, and Simplicity replacement part directly sourced from the manufacturer for use in lawn tractors.

It is an authentic high quality hardware that is supplied from original equipment manufactured for use with Murray lawn tractors. This cotter pin fits through the axle helping to secure the mower wheel. Please note one durable metal pin is included per order. You will need pliers to install or remove this item.

This replacement grease cup is specially designed for use with Char-Broil grills. It is an authentic item that is sourced directly from original equipment manufacturer. The purpose of this tray is to collect the grease and other food particles from the food you are cooking. After each use it is recommended to clean this part with soap and...Read more water to avoid rusting. This item is made out of metal and it is sold individually. Please note, the grease cup clip/holder is sold separately.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This washer is designed for use within lawn tractors, lawn mowers, edgers and snow blowers, and is a genuine OEM part that is sold as an individual. This washer has an approximately .54-inch inner-diameter and .81-inch outer-diameter and is made of high-quality metal, but can wear down due to exposure to heat, friction, and fuel. Due to t...Read morehe versatility of this washer, it can be used in a multitude of settings and applications and is not used for one specific purpose, so check the user manual for your equipment for the exact installation locations of this washer.

This is a genuine Char-Broil replacement part, it is sold individually. The purpose of the Char-Broil G430-0005-W1 Heat Tent is help prevent flare ups and it also helps distribute the heat of the flame evenly. Over time the Heat Tent will have a tendency to rust and degrade. It should be replaced at this time.

This is an authentic replacement part manufactured for use with Char-Broil outdoor grills. The chrome plated bezel is the plate beneath the control knobs that regulate the fuel that is sent to the burners. This bezel is available as an individual replacement part, please see model diagram for associative parts.