4640 - Parts

This is a Genuine Manufacturer Approved replacement Belt used on Murray Lawn Tractors. This part is made out of Rubber and it is Sold Individually. This is the the Smaller Belt that drives Blades on your unit. Clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodical...Read morely and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt. • For your safety make sure to disconnect the spark plug wire. • Fist you would need to lower the mower deck to the lowest position • Then move the blade engagement lever to the Off position. • Roll the belt off the engine pulley from between the belt guide and pulley. • Remove mower deck by removing the bow-tie pins securing the left and right lift arms • Disconnect the blade engagement cable from the mower deck • Remove the bolts from the mower deck belt pulley covers and pull the covers off. • Loosen but don't remove the nuts on the top of the idler pulleys. • Install the new mower deck belt through the belt guides and around the pulleys. • Tighten the nuts on the top of the idler pulleys. • Re-Assemble the Deck

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is a genuine part that is sourced directly from the original equipment manufacturer for use with Murray lawn mowers and garden tractors. It is the part that helps to apply tension on the transmission belt. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment runs great. Keep in mind thi...Read mores high-quality component is made of durable materials and is sold as an individual item. Check the owners manual and the diagrams of your model for the exact location and the correct installation of this pulley. You will need a wrench set to remove the old pulley and secure the new one.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This bolt is designed for use with various models of lawn and garden equipment and is a genuine OEM part. Featuring a square securing-area underneath the head for locking purposes, this bolt measures .31-inches in diameter and is 18 threads-per-inch. This bolt is made of high-quality metal and may require you to acquire multiple, depending on the use and location of installation for your equipment.

This is genuine OEM replacement part used on riding lawn mowers/tractors. This is the wheel that helps to support the deck and allows it to move around easier. This wheel is made out of plastic and it is sold individually. Please note the bolt and nut used to secure this wheel are sold separately. To replace this item you would need a wrench.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

The 7 terminal ignition switch comes with two keys and helps to turn the vehicle on and off. This part is made of metal and is sold individually. If this part becomes broken it will need to be replaced and a screwdriver may be needed during the installation process. This is a genuine Murray part sourced directly from the manufacturer for use in lawn tractors.

This is an ignition switch designed for various lawn tractor models. The ignition switch is the direct interface for starting and stopping the engine. When the key is turned, it sends power through its terminals to the ignition coil, creating a spark that ignites the fuel in the engine and starts it. Over time, the ignition switch can wea...Read morer out from frequent use and may also corrode, leading to partial or complete failure, and preventing the engine from starting. This ignition switch is sold as an individual OEM part and does not include any additional seals or accessories. Replacing this switch requires basic tools such as a screwdriver, pliers, and a wrench. To replace it, simply disconnect and remove the old switch, along with any seals, nuts, or connectors. You can also test the switch using a multimeter to check for continuity before replacing it. To install the new switch, connect it to the same location as the old one and secure it in place.