463273 Char-Broil Grill - Overview

This stainless steel cleaning tool is an OEM part sourced directly from Char-Broil. This tool was designed to scrape off cooked on food or grease from the grates of the grills listed below. Using this tool to maintain the cleanliness of the grill will extend the life of the grates. One item is included per order.

Genuine Char-Broil replacement part, this item is sold individually. It includes the igniter and two 26

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

This genuine Char-Broil replacement flame tamer is designed to help your grill perform at its best. Sold individually, this part serves two important functions: it evenly diffuses heat from the burners below to ensure consistent cooking, and it acts as a barrier to prevent grease and food particles from clogging or damaging the burners. ...Read more Made from durable materials and built to match original specifications, this flame tamer helps extend the life of your grill while improving heat distribution and reducing flare-ups. Whether you're replacing a worn part or upgrading your grill’s performance, this OEM component is a smart and simple solution.

This genuine manufacturer sourced replacement part is specially designed for Char-Broil grills. Igniter is the part that produces the spark to ignite the burner. Features 2 input terminals and two (2) output-connector on the back for the ignition switch. Requires a AA battery (not included). Replacing this electronic ignition module is ...Read moreeasy and does not require any tools • Unplug the wires from the old ignition module • Remove old igniter and replace it with a new one from the kit • Unscrew the button that holds module to the unit • Secure new module in place • Install a battery and secure the module with the button • Connect the wires and test the unit

This is a genuine OEM replacement part for a Char-Broil Outdoor Stove. The grease tray is designed to catch grease drippings from food as it cooks. Before replacing this part make sure the stove is completely cooled down to avoid any possible injury. This part is made of metal with a grey powder coat finish. It is a separately sold replacement part.

This is a Genuine Manufacturer Approved replacement part designed for Weber Gas Grills. This cooking grate made out cast iron with black porcelain coating that helps to prevent food from sticking. Please note, grids should never be cleaned while hot. Doing so can often cause damage to the surface or coating of the grids. Cooking grate provides a stable cooking area for grilling. Includes one (1) grate per order.

This is an authentic OEM replacement part that is supplied directly from Char-Broil for use with a gas grill. The knob is used to control the temperature and intensity of the flame. This part does not require any tools simply connects to the burner valve. This part is made of chrome and plastic and is sold separately.

This is an original part sourced directly from the manufacturer. The infrared cleaning tool was designed to clean the grates of Char-Broil grills and is an identical replacement for a missing or broken tool that originally came with a new unit. This item is sold individually.

This is a genuine manufacturer-sourced replacement part which is specially designed for Char-Broil grills. It is one of the bumpers that were originally installed on a new unit. The part helps to provide support for the lid to prevent metal on metal contact. Refer to the appropriate diagrams of your model to ensure the correct repair proc...Read moreedure. One durable rubber bumper and a screw to secure it are included. A screwdriver will be needed to replace this component.

Introducing a key addition to your grilling arsenal; the Char-Broil Grease Tray. This essential component is designed specifically to capture the grease that drips from food, ensuring a clean and efficient grilling process. To get the most from your Char-Broil Gas Grill, it's crucial to replace the grease tray as needed for the best cooki...Read moreng results. Benefits of this product include hassle-free cleaning and a safer grilling experience. Always remember to wait until the grill has cooled off before installing the grease tray. Add this to your Char-Broil grill today for a smoother, better grilling experience.

This replacement part is specially designed for use with Char-Broil grills. It is an authentic OEM item, not an aftermarket equivalent. This carryover tube is used to carry the flame from one burner to another as well as supporting for the burners themselves. Over time tubes tend to rust in combination of heat and moisture requiring repla...Read morecement. Please note, this stainless steel tube is sold individually. This assembly includes two cotter pins to secure the carryover tube.