463273215 (2015) Char-Broil Grill - Overview

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

This is a genuine OEM replacement part for a Char-Broil Outdoor Stove. The grease tray is designed to catch grease drippings from food as it cooks. Before replacing this part make sure the stove is completely cooled down to avoid any possible injury. This part is made of metal with a grey powder coat finish. It is a separately sold replacement part.

This is a Genuine Manufacturer Approved replacement part designed for Weber Gas Grills. This cooking grate made out cast iron with black porcelain coating that helps to prevent food from sticking. Please note, grids should never be cleaned while hot. Doing so can often cause damage to the surface or coating of the grids. Cooking grate provides a stable cooking area for grilling. Includes one (1) grate per order.

This is an authentic OEM replacement part that is supplied directly from Char-Broil for use with a gas grill. The knob is used to control the temperature and intensity of the flame. This part does not require any tools simply connects to the burner valve. This part is made of chrome and plastic and is sold separately.

This is a genuine manufacturer-sourced replacement part which is specially designed for Char-Broil grills. It is one of the bumpers that were originally installed on a new unit. The part helps to provide support for the lid to prevent metal on metal contact. Refer to the appropriate diagrams of your model to ensure the correct repair proc...Read moreedure. One durable rubber bumper and a screw to secure it are included. A screwdriver will be needed to replace this component.

This thermometer/ temperature gauge is a genuine manufacturer sourced replacement part. It is specially designed for use with Char-Broil grills. It can be used to measure temperature inside the grill. This part is made out metal and it is sold individually. It does include a wingnut that helps to secure it to the unit. Dial reads 150 - 650 degrees. No tools would be needed to replace this item.

This item is a genuine Char-Broil replacement part that is intended to be used with outdoor gas grills. The metal rail attaches to the bottom side of the firebox and is used to mount the grease tray to catch food drippings. The left rail is priced as a single replacement part.

This is a genuine Char-Broil replacement part, sold individually. Stainless steel carryover tube. Tube channel measures 4-3/4" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins. Carryover tubes connect the gas grill burners and carry the flame from one burner to the next. Over time, your carryover tubes may rust or warp. This would be the time to replace them.

An authentic manufacturer-sourced item that is specially designed for use with Char-Broil grills. This is one of the rails used to support the grease tray. It is a high-quality component which is made of durable metal and it is sold individually, please note the hardware to secure it is sold separately.

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacem...Read moreent for the original part that was installed on a new unit. Refer to the diagrams of your model for the correct installation of this component. Note, one durable ceramic electrode with an attached wire is included. Replacing it is a simple task that only requires a screwdriver.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.