463271 Char-Broil Grill - Parts

Discover the reliability and convenience of the Char-Broil Electronic Ignition Module designed for gas grills. It plays an essential role in the function of your grill by supplying power to the igniters, allowing for an easy and quick start to your barbecuing. To enhance the longevity of your grill and experience the best performance, thi...Read mores ignition module is a must-have. Not only it ensures efficient operation, but also it enhances the safety and durability of your grill. Remember to wear work gloves for your safety during the installation. Upgrade your grilling today with this essential Char-Broil component.

This is a genuine Char-Broil replacement part. it is sold individually. The burners are the part of the grill that the flame rises from. This burner is equipt with spider guards. The Burners flame is controlled by the control knobs that are attached to the Valve/Manifold/Regulator. It is a good idea to keep these clean and covered as they have a tendency to rust and corrode. Includes wire mesh spider guards.

This cooking grate is for gas grills. The cooking grate provides a stable cooking area. Wait until the surface is cool to the touch before installing this part.

This stainless-steel cleaning tool is an OEM sourced directly from Char-Broil. This tool was designed to scrape cooked on food or grease from the grates of the grills listed below. Using this tool to maintain the cleanliness of the grill will extend the life of the grates. This item is sold individually.

This is a genuine Char-Broil replacement part, sourced from the original manufacturer for use with outdoor grills. The bumper is silicone rubber, and used on the main lid. This bumper protects the lid and burner box from damage when closing the lid. The bumper is sold individually.

This item is a genuine Char-Broil replacement part that is intended to be used with outdoor gas grills. The metal rail attaches to the bottom side of the firebox and is used to mount the grease tray to catch food drippings. The left rail is priced as a single replacement part.

This is an authentic Char-Broil replacement part that has been sourced from the original manufacturer to be used with infrared gas grills. The metal cooking grates fit into the fire box and are used to support the food being cooked above the burners. This item is available as an individual replacement.

This is a genuine Char-Broil replacement part, sold individually. Stainless steel carryover tube. Tube channel measures 4-3/4" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins. Carryover tubes connect the gas grill burners and carry the flame from one burner to the next. Over time, your carryover tubes may rust or warp. This would be the time to replace them.

An authentic manufacturer-sourced item that is specially designed for use with Char-Broil grills. This is one of the rails used to support the grease tray. It is a high-quality component which is made of durable metal and it is sold individually, please note the hardware to secure it is sold separately.

It is an authentic OEM part which is specially designed for Char-Broil grills. The electrode provides a spark that arcs to the main burner to ignite the gas. If the burner won't light, first clean the electrode and check that it's aligned. If the problem persists, replace the igniter electrode. This item will provide an identical replacem...Read moreent for the original part that was installed on a new unit. Refer to the diagrams of your model for the correct installation of this component. Note, one durable ceramic electrode with an attached wire is included. Replacing it is a simple task that only requires a screwdriver.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

The sideburner burner goes next to the sideburner. It is an authentic OEM sourced item which is specially produced for use with Char-Broil grills. This item is available as an individual replacement part. A screwdriver may be helpful when replacing this item. This part may become broken and will need to be replaced.