46104 Murray Lawn Tractor - Parts

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is a Genuine Manufacturer Approved replacement Belt used on Murray Lawn Tractors. This part is made out of Rubber and it is Sold Individually. This is the the Smaller Belt that drives Blades on your unit. Clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodical...Read morely and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt. • For your safety make sure to disconnect the spark plug wire. • Fist you would need to lower the mower deck to the lowest position • Then move the blade engagement lever to the Off position. • Roll the belt off the engine pulley from between the belt guide and pulley. • Remove mower deck by removing the bow-tie pins securing the left and right lift arms • Disconnect the blade engagement cable from the mower deck • Remove the bolts from the mower deck belt pulley covers and pull the covers off. • Loosen but don't remove the nuts on the top of the idler pulleys. • Install the new mower deck belt through the belt guides and around the pulleys. • Tighten the nuts on the top of the idler pulleys. • Re-Assemble the Deck

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This replacement spacer is a high quality item that is specially manufactured for use with Murray lawn tractors. This is an authentic hardware which has multiple uses depending on the model of the unit, please make sure to check appropriate diagrams for correct location and use of this part. It is made from durable metal and it is sold individually.

This item is sourced from the original manufacturer. It is an authentic part used in Murray lawn tractors/mowers. A limit switch is an interlock safety switch which prevents the tractor from running in unsafe conditions. One (1) plastic switch is included per order. Mechanical switches tend to break with time, eventually requiring replacement.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This item is an authentic OEM sourced replacement part that is intended to be used with riding lawnmowers from Murray. The metal pinion gear attaches to the steering post. The pinion interconnects with the sector gear to push and pull the drag links to make the wheels turn with the steering post. This item is available as an individual replacement part.

This bolt is designed for use with various models of lawn and garden equipment and is a genuine OEM part. Featuring a square securing-area underneath the head for locking purposes, this bolt measures .31-inches in diameter and is 18 threads-per-inch. This bolt is made of high-quality metal and may require you to acquire multiple, depending on the use and location of installation for your equipment.

This is genuine OEM replacement part used on riding lawn mowers/tractors. This is the wheel that helps to support the deck and allows it to move around easier. This wheel is made out of plastic and it is sold individually. Please note the bolt and nut used to secure this wheel are sold separately. To replace this item you would need a wrench.

This is an OEM Murray part directly sourced from the manufacturer for use in lawn tractors. The spring attaches to the brake bracket assembly. During replacement, it may require a wrench to help install the part correctly. It is made of metal and will require replacing if it becomes broken or bent. This is available as an individual replacement part.