46101 Murray Lawn Tractor - Parts

This part is commonly used in Murray lawn tractors and Briggs & Stratton engines. In lawn tractors it connects to the steering post. In engines it connects to the guard-rewind starter. Bearings of this type control and direct motion. They are therefore subject to metal fatigue and it is common to replace them regularly. A wrench is usually needed in this repair.

This ignition key is an authentic replacement part. It is sourced directly from original equipment manufacturer for use with Murray riding lawn mowers/tractors. This is a safety feature for unauthorized use of the mower. The key is inserted into the switch and it allows you to start the unit. Includes two (2) metal ignition keys.

The Shoulder Bolt is used to secure link arms of the mower. It attaches to the link arms of the mower, requiring a wrench or socket to install, and its installation is rated as "Easy". If damaged due to fatigue, you may hear a vibration or clanking sound due to the part becoming loose. The part is silver, metal and individually sold. Check your make, model and diagrams to ensure this is the correct part for you.

It is an authentic high quality hardware that is supplied from original equipment manufactured for use with Murray lawn tractors. This cotter pin fits through the axle helping to secure the mower wheel. Please note one durable metal pin is included per order. You will need pliers to install or remove this item.

This part has been sourced from the original manufacturer ensure a high level of quality. The idler pulley is intended to be used with riding lawnmowers from Murray. The idler pulley attaches to the frame assembly and is used to guide the direction that the drive belt travels. This item is sold as an individual replacement part.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This washer is designed for use within lawn tractors, lawn mowers, edgers and snow blowers, and is a genuine OEM part that is sold as an individual. This washer has an approximately .54-inch inner-diameter and .81-inch outer-diameter and is made of high-quality metal, but can wear down due to exposure to heat, friction, and fuel. Due to t...Read morehe versatility of this washer, it can be used in a multitude of settings and applications and is not used for one specific purpose, so check the user manual for your equipment for the exact installation locations of this washer.

This genuine item is supplied directly from the original equipment manufacturer for use with Murray riding lawn mowers and garden tractors. It is a high-quality replacement for a missing or faulty harness that is utilized to connect the lights, please make sure to refer to the appropriate diagrams of your model for the correct location an...Read mored application of this component. Keep in mind this high-quality rubber insulated harness is sold individually.

It is an authentic OEM sourced item which is specially produced for use with Murray lawn tractors. The spindle bearing goes between the washer and the cast iron axle and helps to reduce the friction. During the installation process, a screwdriver and a set of pliers might be needed to replace this part. It is made of plastic and will requ...Read moreire replacing if it becomes broken. This is available as an individual replacement part.

The pulley is an important component which holds the belt and drives the blade. It is an authentic part which is supplied directly from the original equipment manufacturer for Murray and Snapper riding lawn mowers and garden tractors. This is an identical replacement for a damaged or a missing part that was installed on a new unit. It is ...Read moremade of high-quality metal and is sold individually. Note, the hardware to secure it is sold separately. A wrench set will be needed to perform this repair. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This is an authentic OEM sourced part which is specially designed for use with Murray riding lawn mowers and garden tractors. It is an identical replacement for a missing or a faulty spacer that helps to secure the pulley, please make sure to check the appropriate diagrams of your model for the correct location and application of this com...Read moreponent. Keep in mind this high-quality hardware is made of durable metal and is sold individually.