EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

4458B Frigidaire Range - Instructions

All Instructions for the 4458B
46 - 60 of 276

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Coroded drip pans
4 of 5 people found this instruction helpful.
  • Lori from Old Town, FL
  • Really Easy
  • Less than 15 mins
Removed heating elements and replaced drip pans. And by the way, this is the only 'pans' I could find to fit. Thanks.
Was this helpful?
Thank you for voting!
Switching out drip pan, surface element and glide door
4 of 5 people found this instruction helpful.
  • Carrie from SEMINOLE, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
i used a screwdriver to remove the old drip pans and broken surface element in addition to prepping the bracket for the door. It was extremely difficult for me to find these parts for the frigidaire oven but these fit perfectly! I was extremely pleased with how quick it was to replace or fix everything. I will definitely order again when the other surface elements go!
Was this helpful?
Thank you for voting!
Broken door glide
4 of 5 people found this instruction helpful.
  • Michael from Signal Hill, CA
  • Really Easy
  • Less than 15 mins
snapped the new piece of plastic in its place and ta da, its fixed.
Was this helpful?
Thank you for voting!
Drip bowels needed to be replaced
3 of 3 people found this instruction helpful.
  • Francine from OTEGO, NY
  • Very Easy
  • Less than 15 mins
I just took the old ones out and replaced them with the new ones. It took less than 5 minutes.
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people found this instruction helpful.
  • Alan from SAN MATEO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Drawer Glide Was Broken
3 of 3 people found this instruction helpful.
  • Karen from Yuma, AZ
  • Very Easy
  • Less than 15 mins
Took the drawer out, snapped the new glide in place, and replaced the drawer. Installation was simple with no tools required.
Was this helpful?
Thank you for voting!
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
3 of 3 people found this instruction helpful.
  • Daniel from Falmouth, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench set
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Was this helpful?
Thank you for voting!
Cooktop burner was wore out from age
3 of 3 people found this instruction helpful.
  • John from HAYDEN, AL
  • Very Easy
  • Less than 15 mins
Just pulled the old cook top burner out and put the new one in .it took about 1 1/2 minutes
Was this helpful?
Thank you for voting!
Broiler element burned out
3 of 3 people found this instruction helpful.
  • Trisha from Shelbyville, TN
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Just took the old one out & put the new one in . Just a few screws to remove & put them back when replacing to new broil element , and were back up and cooking :)
Was this helpful?
Thank you for voting!
Heating element burned out
3 of 4 people found this instruction helpful.
  • Pat from GREELEY, CO
  • Very Easy
  • Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people found this instruction helpful.
  • Marilyn from Clearwater, FL
  • Easy
  • Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 people found this instruction helpful.
  • rosetta from COLUMBIA, VA
  • Really Easy
  • Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
Original Element physically broke
2 of 2 people found this instruction helpful.
  • Beverly from WEATOGUE, CT
  • Very Easy
  • Less than 15 mins
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the Model # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
Was this helpful?
Thank you for voting!
Worn Drip Bowls
2 of 2 people found this instruction helpful.
  • River Oaks Town Homes from DES MOINES, IA
  • Very Easy
  • Less than 15 mins
Pulled out the old drip bowls and replaced with the new. A simple snap!
Was this helpful?
Thank you for voting!
the burner stop working
2 of 2 people found this instruction helpful.
  • Anthony J from HAMMONTON, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Just followed the instructions
Was this helpful?
Thank you for voting!
All Instructions for the 4458B
46 - 60 of 276