4447A Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
surface would not get hot
0 of 1 people
found this instruction helpful.
-
michael from gurdon, AR
- Really Easy
- 15 - 30 mins
-
Screw drivers
had to replace a piece of the wire harness and als o the surface element prongs were melted so i replaed them and now the stove is working perfect..thanks parts select you saved me hundreds of dollars,
Was this helpful?
Thank you for voting!
Burner burnt out & 1 plug in bad
0 of 1 people
found this instruction helpful.
-
Geraldine from Hoxie, AR
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I started to work on it & in came a friend & saw a helpless female & took to the job & finished it real fast & efficently.Great repair. Gearldine
Was this helpful?
Thank you for voting!
Had broken and missing parts.
0 of 1 people
found this instruction helpful.
-
Calvin from Versailles, MO
- Easy
- 15 - 30 mins
Removed drawer and replaced broken and missing parts. Very easy when you have correct parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer Guides Broken
1 of 4 people
found this instruction helpful.
-
Charles from Petersburg, VA
- Really Easy
- Less than 15 mins
New ones just snapped into place it takes less than a minute
Was this helpful?
Thank you for voting!
I had a broken front drawer glide on my range.
0 of 1 people
found this instruction helpful.
-
Mike from Everett, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Easy repair, I used a screw driver to pry out the broken part and no tools were required to put in the new part.
Was this helpful?
Thank you for voting!
drawer wouldn't fit flush
0 of 1 people
found this instruction helpful.
-
Gary from Milford, DE
- Really Easy
- Less than 15 mins
-
Pliers
removed drawer - removed broken drawer glides. new glides clip in very easy
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner units needed to be replaced from age/overuse.
0 of 1 people
found this instruction helpful.
-
Beth from Myrtle Point, OR
- Really Easy
- Less than 15 mins
Easy to open package and plug in unit! Too simple and quite happy with end results!
Was this helpful?
Thank you for voting!
missing drawer glide
0 of 1 people
found this instruction helpful.
-
Barbara from Cambridge City, IN
- Really Easy
- Less than 15 mins
Pulled out the bottom drawer of the stove. Attached the new drawer glide to the drawer. Replaced the drawer and it worked like new!
I received the part two days after I had ordered it. I was very pleased with the speed of the service and the ease with which I found the part I needed on the web site. I will use your site aga ... Read more in if needed.
I received the part two days after I had ordered it. I was very pleased with the speed of the service and the ease with which I found the part I needed on the web site. I will use your site aga ... Read more in if needed.
Read less
Was this helpful?
Thank you for voting!
Range burner coil worked intermittenly
0 of 1 people
found this instruction helpful.
-
MARK from LIBERTY LAKE, WA
- Easy
- Less than 15 mins
Unplugged range and cut wires on existing burner plug. Connected the replacement plug with the provided wire-nuts. Secured with provided shrink-wrap. Reattached burner plug to to range top, and plugged in the burner coil. Presto.
Was this helpful?
Thank you for voting!
Drawer glides were missing and broken
0 of 1 people
found this instruction helpful.
-
LALLPWRENCE from TRAFFORD, PA
- Easy
- Less than 15 mins
-
Screw drivers
Removed old glides and replaced new ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Original rear glides had broken
0 of 1 people
found this instruction helpful.
-
Jeff from Irvine, CA
- Really Easy
- Less than 15 mins
Took the new parts out of the bags, slipped them into place and had the drawer working flawlessly in less than 5 minutes!
I surprised myself.
I surprised myself.
Was this helpful?
Thank you for voting!
No burner
0 of 1 people
found this instruction helpful.
-
Janet from North Vernon, IN
- Really Easy
- Less than 15 mins
I just plugged it into the receptacle on the stovetop and turned the thing on, and it worked! I'd been without the 4th burner for quite some time. Nice to have it back!
Was this helpful?
Thank you for voting!
Replacing broken parts
0 of 1 people
found this instruction helpful.
-
Barry from Sarasota, FL
- Really Easy
- Less than 15 mins
Wow! That was simple! I did not even have to run all over town looking for the parts. I just hopped on the web, checked out the online diagrams, ordered and the parts showed up in the mail within a few days. It could not have been easier. Parts Select is now in my bookmarks for future use.!
Thanks guys
Thanks guys
Other Parts Used:
Was this helpful?
Thank you for voting!
broken glide
0 of 1 people
found this instruction helpful.
-
robert from kettering, OH
- Really Easy
- Less than 15 mins
snapped new glide in place.
Was this helpful?
Thank you for voting!
Broken drawer glide
1 of 4 people
found this instruction helpful.
-
Richard from Greenwich, NY
- Really Easy
- Less than 15 mins
Fed ex dropped the part off at 7 one night, had it repaired by 7:05. Popped the broken glide off, popped the new one in. Easier than easy. Took longer to empty the drawer and remove it than to do the repair.
Was this helpful?
Thank you for voting!