Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Install valve knobs
3 of 6 peoplefound this instruction helpful.
Donald from Peebles, OH
Really Easy
Less than 15 mins
This was not a difficult task. I just slid the valve knob on the shaft, repair was complete. This was a very easy diy project.
Was this helpful?
Thank you for voting!
my knobs were broken on 30 year old range
1 personfound this instruction helpful.
Larry from LAWTON, MI
Very Easy
Less than 15 mins
Pliers
I took a pair of channel locks pulled the old one off pushed the new one on they look really nice and was glad they had the parts for such an old stove. thank you,now my hubby is glad so he doesn't have to buy a new stove.
Was this helpful?
Thank you for voting!
35 year old range. grates too dirty to clean. Parts Select had exact replacement grates. Perfect fit.
1 personfound this instruction helpful.
FRANCES from AFFTON, MO
Very Easy
Less than 15 mins
Easy, removed from box, put in place on range. Happy customer. Good company to find exact replacement parts.
Was this helpful?
Thank you for voting!
Simply remove and install new parts
1 personfound this instruction helpful.
Jacob from LITTLE CANADA, MN
Really Easy
15 - 30 mins
Overall, it was painless and easy with zero problems
Was this helpful?
Thank you for voting!
needed to replace a side oven door seal
3 of 7 peoplefound this instruction helpful.
Robert from Lebanon, NH
Easy
Less than 15 mins
The trickiest part was making sure that the correct part was ordered. The first attempt was a failure. The seal was too long and the clips were too big. After finding the correct part it was a breeze.
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 peoplefound this instruction helpful.
RAYMOND from JACKSONVILLE, FL
Really Easy
Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Needed to replace two stove valve knobs.
1 of 2 peoplefound this instruction helpful.
Roberta from BROOKLYN, NY
Really Easy
Less than 15 mins
Inserting two stove valve knobs took 10 seconds! No tools necessary.
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 peoplefound this instruction helpful.
Willi from Old Saybrook, CT
Really Easy
Less than 15 mins
Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
missing clock knob
1 of 3 peoplefound this instruction helpful.
Jimmie from Hampton, VA
Really Easy
Less than 15 mins
placed knob on clock shaft with my fingers
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 peoplefound this instruction helpful.
Ivanka from Atlantra, GA
Really Easy
30 - 60 mins
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read moret bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 peoplefound this instruction helpful.
William from Schwenksville, PA
Easy
Less than 15 mins
1. Unscrewed glass cover on bulb 2. Removed old bulb 3. Screwed in new bulb 4. Replaced glass cover 5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
The strick and latch broke
1 of 4 peoplefound this instruction helpful.
William from Monroe, MI
Really Easy
Less than 15 mins
Pliers
I used a pair of plyers to remove both items and pushed new items in holes. Job complete
My Orders
