41BD767G034 MTD Trimmer - Parts

This is a genuine manufacturer sourced replacement fuel cap assembly. It is supplied directly from original manufacturer for use with a variety of gas powered lawn and garden equipment. It is used to keep the fuel in the tank. If the fuel cap is damaged or lost it should be replaced for the unit to function safely. This is a plastic fuel cap that is sold individually.

The metal spring goes between the e-clip and the plunger and helps to maintain tension. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. This is a small part that will need to be replaced if it becomes lost or stretched and may require a screwdriver to install the spring. This is available as an individual replacement part.

It is an authentic OEM sourced part which is made for use with handheld trimmers. This is the special component which provides a tight fit for the outer spool. Unfortunately, over time the hardware may get damaged or lost eventually requiring a replacement. One durable metal retainer is included. Refer to the appropriate diagrams for your...Read more model for the exact location and the correct application. You may need snap-ring pliers to perform this repair.

The Clutch Drum is a silver, metal part used to transmit power from the engine to the drive shaft. Installation is rated "Medium" difficult and will require a screwdriver, wrench set, and torx wrenches. This part attaches to the clutch assembly. If broken, the clutch will slip and you will lose drive power. If this happens, the part must be replaced.

This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.

This shoulder strap is an authentic manufacturer-sourced part that is designed for use in a variety of lawn and garden equipment. It is an adjustable strap made of durable synthetic material that is worn over the shoulder. The strap features one plastic slide adjuster and one metal clasp that secures it to the equipment. It is designed to...Read more reduce strain on the arms, shoulders and back when using the equipment over a long period. It also stabilizes the equipment for easier handling. Over time the strap can wear down, or the clasp and adjuster may break, leading to discomfort and strain. Detach the old strap from the equipment and clasp the new strap onto the attachment points. Adjust the length using the plastic adjuster until the strap sits comfortably on your shoulder.

This is a genuine OEM sourced component which is specially made for use with Walbro carburetors commonly installed on lawn and garden equipment. It provides an identical replacement for a missing or a faulty outer spool and eyelet assembly with a retainer. It is the part that houses the spool, please make sure to refer to the appropriate ...Read morediagrams of your model for the correct location and application of this part. Keep in mind this high-quality assembly is sold individually.

This replacement throttle cable is a genuine OEM sourced item, not an aftermarket substitution. It is commonly used on handheld string trimmers. This cable is connected to the carburetor and it stops the engine when you set the unit to the full choke. Please note the housing, trigger and screws are sold separately.

It is a manufacturer-sourced part that is specially designed for handheld lawn and garden equipment. The component protects and covers the air filter and the muffler on the engine. It is an identical replacement for a damaged or a missing air cleaner/muffler cover assembly that was installed on a new unit. Note this high-quality assembly ...Read moreincludes the plastic cover, the foam filter, the metal plate and the hardware to secure it. Refer to the owner\\\'s manual and the diagrams for your model to ensure the proper repair procedure. A screwdriver will be needed to replace this assembly.

It is an authentic OEM item that is designed for use with handheld trimmers. A thrust washer is a special part which helps to provide a tight fit for the spool. This part provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Make sure to check the appropriate diagrams for your specific mod...Read moreel for the exact location and the correct application of this thrust washer. Note, it is made of durable rubber and is sold individually.

The anti-rotation screw attaches to the lower handle clamp. This item is priced individually and is made out of metal. It is a genuine replacement part used in compatible tillers, trimmers, and blowers made by Ryobi, Troy-Bilt, MTD, Bolens, Yard Man, Yard Machines, and Cub Cadet. A torx screwdriver will be needed during the installation process. It will need to be replaced if it becomes stripped or broken.