4180 - Parts

An OEM part sourced directly from the manufacturer, this part is sold individually. Washers help to spread the load, and prevent damage to the surface being fixed, or provide some sort of insulation such as electrical. Washers can also be important for preventing galvanic corrosion. This specific washer is commonly used with outdoor law...Read moren equipment, and is compatible with the mowers and tractors that are listed below.

This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.

This is an Original Manufacturer Sourced replacement part used on certain Lawn Tractor/Riding Mowers. This part is made out of metal and is sold individually. Mandrel Pulley plays and important roll by transferring the energy/motion from the Motor to the Blades using belts. If the Pulley is bent or damaged it will affect engines performance and should be replaced to avoid further damage.

This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.

The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold in place. Installation is rated as "Easy", but it will depend on the parts your are securing and the equipment you are using. Consult your m...Read moreake, model and diagrams to ensure this is the correct part. The part is sold individually.

This OEM-certified washer provides support, spacing, and reduces friction between parts in your lawn equipment, typically working alongside bolts or screws. This washer has a thickness of 16 gauge and dimensions of 25/32 x 1-5/8 inches. A damaged washer will look deformed or cracked, leading to parts becoming loose or not fitting properly...Read more in your machine. When you remove a broken washer from your machine, you will need pliers or a wrench to loosen the bolt or screw securing it. Once the fastener has been removed, you can pry the washer with a screwdriver. It is important to know that this washer is sold individually. Before adding this replacement part into your cart, check your instruction manual to determine the number of washers your machine needs.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This is an original part from Husqvarna. The hood latch is constructed of flexible plastic, and is made for use with many riding lawn mowers. This component is fastened onto the lower bagger chute, latching it to the upper chute. The hood latch is sold individually. A pair of pliers and a screwdriver may be helpful for the removal and replacement.

This genuine replacement mandrel stripper is sourced directly from the original manufacturer and is designed for use with riding lawn mowers and garden tractors. It functions as a mounting bracket between the mandrel assembly and the mower deck, while also serving to protect the mandrel housing and bearing from debris buildup. By preve...Read morenting grass and debris accumulation, this part helps extend the life of your mower’s mandrel components. Made from durable metal, this item is sold individually. Installation Tip: A wrench is required to complete the repair. Be sure to consult your model’s diagram to ensure proper fit and placement.

It is a genuine manufacturer-approved part which is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of the interlock switch is to act as a safety feature which will shut the engine off if the driver leaves the seat. Unfortunately, over time parts will wear out and it may...Read more begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch is sold individually. You may need a screwdriver and pliers to perform this repair.

It is an authentic replacement cap-spindle that is supplied by the original equipment manufacturer for use with Poulan, Ryobi and Husqvarna riding lawn mowers and garden tractors. It is an identical replacement for a missing or damaged cap that was originally installed on a new equipment. The cap is utilized to cover the spindle. Make sur...Read moree to check the appropriate diagrams of your model for the exact location and application of this hardware. This high-quality cap-spindle is made of durable plastic material and is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The return spring is commonly found in Craftsman lawn tractors and riding mowers. This part is made of metal, and is generally used to apply tension to the idler arm. You may require pliers when replacing this item. The return spring is available as an individual replacement part.