413RT Simplicity Tiller - Parts

This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this muffler is to reduce noise from a working engine, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality component has a durable metal body and is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this screen is to ensure that the fuel that goes through the unit is free of dust and other harmful contaminants. Unfortunately, over time it may wear out and...Read more get clogged eventually requiring a replacement. Keep in mind this high-quality component is made of durable mesh material and is sold individually.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

The oil seal is made of plastic and rubber. This part is available individually. It is an authentic OEM sourced item which is specially produced for use with Briggs & Stratton engines and generators. A hammer may be required to replace this part. It will require replacing if it becomes broken or loses its seal.

This is an OEM replacement part for Briggs and Stratton, Murray, Snapper, and Simplicity engines. When engaged the ignition key starts the lawn tractor. This part is made of metal and is sold in a set of two. There are no tools needs to use this part, as it comes pre-assembled and really to use.

It is a genuine OEM supplied replacement screw is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This is one of the screws for the air cleaner, please refer to the appropriate diagrams of your model for the correct location and use of this hardware. It is made of high-qual...Read moreity metal and it is sold individually, you will need a wrench in order to secure or remove it.

This is a genuine replacement part that is OEM sourced to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to fasten the diaphragm cover to the body of the carburetor. A screwdriver is needed to install the screw and this item is sold as an individual replacement part.

This is a genuine replacement part sourced from the original manufacturer for use with small engines. The special oil seal is commonly used to form a seal between the camshaft and the crankcase cover. The oil seal is available as an individual replacement part, please see model diagram for associative parts.