My Orders
41330119 General Electric Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
when dishwasher was turned on no water sprayed out the rotating arm
-
terry from port clinton, OH
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Wrench (Adjustable)
I diconected the electric removed water line removed 2 hex head screws pulled out inlet valve squeezed the pressure clamp and pulled off water inlet line and re assembled very easy
Was this helpful?
Thank you for voting!
multiple rust spots on the old rack
-
Clifford from Saint Louis,, MO
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Original part no longer made. Substitute too small by a half an inch. Corrected the problem by removing the 4 corner wheels from the old rack and put them on the new one. Now, it fits and works perfectly.
Was this helpful?
Thank you for voting!
Broken vent on microwave
-
Tom from Romoland, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Ordered the part and installed...easy and great prices.
Was this helpful?
Thank you for voting!
Old valve had hairline crack and leaking
-
lawrence from lexington, NC
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers, Wrench set
2 screws to remove valve, turn water off, detach water line, detach plastic water outlet line, and put the new one on, reattaching everything in reverse. Electrical hookup was just two wires to solenoid. Slipped them off and back on new valve solenoid. Some difficulty getting support screws back in.
Was this helpful?
Thank you for voting!