40708C Murray Lawn Tractor - Parts

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This replacement fuel cap is a genuine OEM sourced item, not an aftermarket imitation. It is specially designed for use with Murray lawn tractors. It is used to keep the fuel in the tank. This fuel cap is made from durable black plastic and it is sold individually.

This is a genuine part that is sourced directly from the original equipment manufacturer for use with Murray lawn mowers and garden tractors. It is the part that helps to apply tension on the transmission belt. Over time it may wear out or get damaged eventually requiring a replacement to ensure your equipment runs great. Keep in mind thi...Read mores high-quality component is made of durable materials and is sold as an individual item. Check the owners manual and the diagrams of your model for the exact location and the correct installation of this pulley. You will need a wrench set to remove the old pulley and secure the new one.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

Bolt-hex.31-18x4.12 o

This bolt is designed for use with various models of lawn and garden equipment and is a genuine OEM part. Featuring a square securing-area underneath the head for locking purposes, this bolt measures .31-inches in diameter and is 18 threads-per-inch. This bolt is made of high-quality metal and may require you to acquire multiple, depending on the use and location of installation for your equipment.

This is an ignition switch designed for various lawn tractor models. The ignition switch is the direct interface for starting and stopping the engine. When the key is turned, it sends power through its terminals to the ignition coil, creating a spark that ignites the fuel in the engine and starts it. Over time, the ignition switch can wea...Read morer out from frequent use and may also corrode, leading to partial or complete failure, and preventing the engine from starting. This ignition switch is sold as an individual OEM part and does not include any additional seals or accessories. Replacing this switch requires basic tools such as a screwdriver, pliers, and a wrench. To replace it, simply disconnect and remove the old switch, along with any seals, nuts, or connectors. You can also test the switch using a multimeter to check for continuity before replacing it. To install the new switch, connect it to the same location as the old one and secure it in place.

This durable pedal is an OEM direct from Murray which was designed for use with lawn tractors. Pedals can become worn down over time, requiring replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. This part is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This part is available individually and is made of plastic and metal. The limit switch connects to the interlock and helps to turn off the engine if there is a problem. A wrench might be required during the replacement of this part. It will require replacing if it becomes broken. This is a Murray, Snapper, and Simplicity replacement part directly sourced from the manufacturer for use in lawn tractors.