Switch to Classic
Models > 3XACM18XD0 > Instructions

3XACM18XD0 Whirlpool Air Conditioner - Instructions

All Instructions for the 3XACM18XD0
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ac Would Cool But Compresser Would Not Cycle On &Off
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons
Parts Used:
Thermostat with Clip and Guide
  • Ron from Knob Noster, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LIght switch on oven door was broken
Turned off power at circuit breaker. Removed 4 phillips screws from area over oven door. Pulled control panel out and twisted to clear top rail. Pulled two wires off of old switch.Pulled old switch through panel. Inserted new switch. Attached the two wires to new switch. Replaced panel and inserted four screws. Turned on power - it works!
Parts Used:
Rocker Switch - Black
  • James from Sequim, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3XACM18XD0
1 - 2 of 2