EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3RLS Whirlpool Washer - Parts

37 - 48 of 342

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gearcase – Part Number: 3360629
$299.77
In Stock
Gearcase
★★★★★
★★★★★
(7)
Part #3360629
This is used in your direct drive washer that has a neutral drain.
Drive Block - 2 5/16 Inch High – Part Number: WP389140
$19.30
In Stock
Drive Block - 2 5/16 Inch High
★★★★★
★★★★★
(2)
Part #WP389140
This washer drive block is an essential component that connects the inner spin basket to the drive shaft, enabling proper spinning during wash and spin cycles. Measuring approximately 2-5/16 inches high, it is designed for large-capacity washers with belt or direct drive systems. A worn drive block can cause loud noises, shaking, poor spinning, or leave clothes excessively wet. Installation requires basic tools and disassembly; always unplug the appliance and shut off water supply before starting the repair. Regular inspection and timely replacement help maintain optimal washer performance.
Washer Water Inlet Syphon – Part Number: WP3360977
$46.34
In Stock
Washer Water Inlet Syphon
★★★★★
★★★★★
(8)
Part #WP3360977
This part prevents water from flowing back into your main water supply line.
Lid Bumper – Part Number: WP9724509
$7.47
In Stock
Lid Bumper
★★★★★
★★★★★
(4)
Part #WP9724509
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
Clutch Lining Kit – Part Number: 285790
$47.40
In Stock
Clutch Lining Kit
★★★★★
★★★★★
(3)
Part #285790
This clutch band and lining kit helps control the washer's spin cycle by regulating the transfer of power between the drive system and the wash basket. It allows the basket to gradually reach full spin speed, helping remove excess water from clothing at the end of the cycle. If the washer is spinning slowly, leaving clothes wet, making unusual noises, vibrating excessively, or not spinning at all, a worn clutch may be the cause. Replacing the clutch components with this kit can help restore proper spin performance, improve water extraction, and keep the washer operating efficiently. The kit includes the key parts needed to repair the clutch assembly and restore reliable operation.
Fabric Softener Dispenser – Part Number: 8575076A
$24.67
In Stock
Fabric Softener Dispenser
★★★★★
★★★★★
(27)
Part #8575076A
This fabric softener dispenser releases softener at the proper time during the wash cycle to ensure even distribution. It helps prevent residue buildup on clothing and supports consistent fabric care. Replacing a cracked or clogged dispenser restores proper dispensing and improves wash results.
Spring Outer Bracket – Part Number: WP64067
$9.62
In Stock
Washer Upper Agitator – Part Number: WP3363003
$110.41
In Stock
Washer Upper Agitator
Part #WP3363003
This upper agitator is an OEM part for your washing machine. It works with the rets fo the agitator assembly to spin clothing during the wash cycle. Make sure the power source to the washer is shut off before beginning this repair. To complete this repair you will need a ratchet and 7/16ths inch socket. To gain access to this part you will simply need to remove the detergent dispenser and barrier cap.
Drain Hose with Clamp – Part Number: 285664
$32.63
In Stock
Spin Pinion Seal – Part Number: WP356427
$9.62
In Stock
Spin Pinion Seal
Part #WP356427
This seal is for the top of basket drive tube shaft.
Spacer – Part Number: WP62750
$9.62
Special Order
Spacer
Part #WP62750
Used to put a space between the cabinet and the top of the washer.
Leveling Leg Locking Nut – Part Number: WP3359452
$7.47
In Stock
Leveling Leg Locking Nut
Part #WP3359452
The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling legs which helps to stabilize and level the appliances when they are placed on uneven surfaces. The nut ensures that the leg is stable and does not move during operation. Over time, the threads on the nut may become stripped, or the nut can corrode and break rendering it unable to secure the leveling legs. A faulty nut will cause the appliance to shake and vibrate excessively, and potentially damage the floor and its internal components. It is recommended to replace both the leveling leg and nut at the same time. Use a wrench or pliers to loosen and remove the old locking nut from the leveling leg. Thread the new nut on to the leveling leg and ensure that it is tightened securely. Be careful not to overtighten and damage the threads. Gently shake the appliance to ensure that it is stable and level. Each nut is sold individually.
37 - 48 of 342