EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3RLG Whirlpool Dryer - Parts

13 - 24 of 261

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer Radiant Flame Sensor – Part Number: WP338906
$35.80
In Stock
Dryer Radiant Flame Sensor
★★★★★
★★★★★
(12)
Part #WP338906
If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough to ignite gas to light the burner. Once the igniter is hot enough it will open the valve and allow gas to flow. This is a safety mechanism to prevent dangerous levels of gas from building up. To repair, the main top of the dryer should be lifted, as well as the front panel to access the component. This flame sensor assembly is made of both plastic and metal.
Dryer Lint Filter – Part Number: WP349639
$44.23
In Stock
Dryer Lint Filter
★★★★★
★★★★★
(83)
Part #WP349639
This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.
Leveling Foot – Part Number: 49621
$6.40
In Stock
Leveling Foot
★★★★★
★★★★★
(13)
Part #49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.
Idler Pulley with Bracket – Part Number: W10837240
$27.36
In Stock
Idler Pulley with Bracket
★★★★★
★★★★★
(47)
Part #W10837240
The idler pulley with bracket ensures proper tension on the dryer’s drive belt, allowing the drum to spin effectively. This assembly includes the pulley and arm, making it ideal for replacing a worn or damaged component. Designed for various Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dryers, this genuine OEM part guarantees reliability and performance. If your dryer is noisy or the drum is not turning properly, this part may be the solution. Always disconnect power and wear gloves during installation.
Drive Motor with Pulley – Part Number: 279827
$97.46
In Stock
Drive Motor with Pulley
★★★★★
★★★★★
(36)
Part #279827
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
Rear Drum Felt Seal – Part Number: W10612022
$42.12
In Stock
Rear Drum Felt Seal
★★★★★
★★★★★
(47)
Part #W10612022
This is a genuine OEM replacement rear drum seal for your dryer. This seal is made of felt and comes with the adhesive required for installation. The purpose of the seal is to prevent hot air from escaping the drum while the dryer is operating. If you notice that it is taking too long for your laundry to dry, that marks are left on your laundry, or the machine is noisy or will not tumble, then you may need to replace the seal.
Thrust – Part Number: WPW10121334
$7.47
In Stock
Thermal Cut-Off Fuse Kit – Part Number: W11050897
$16.07
In Stock
Thermal Cut-Off Fuse Kit
★★★★★
★★★★★
(5)
Part #W11050897
This OEM high-limit thermostat kit includes the thermal cut-off fuse and the high-limit thermostat. The purpose of this part is to cut-off power to the dryer when it overheats. Common indications that this part requires replacement are if your dryer will not start, it is overheating, or no heat is coming from the dryer at all. Please note that the manufacturer has made updates to this part so it may look different from the original.
Dryer Door Switch Assembly – Part Number: WP3406105
$27.36
In Stock
Dryer Door Switch Assembly
★★★★★
★★★★★
(50)
Part #WP3406105
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Dryer Blower wheel – Part Number: WP694089
$34.74
In Stock
Dryer Blower wheel
★★★★★
★★★★★
(22)
Part #WP694089
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
Dryer Drum Seal with Adhesive – Part Number: 280114
$45.29
In Stock
Dryer Drum Seal with Adhesive
★★★★★
★★★★★
(24)
Part #280114
This drum seal with a silicone rubber adhesive is used in dryers. This part seals the drum to make sure air does not escape from the dryer. If your dryer is making loud noises, is not producing enough heat, or no heat at all, or there are marks left on your clothes, replacing the seal on your dryer can solve the problem. The tools needed for this installation project are: 1/4 inch nut driver, Phillips screwdriver, small flat blade screwdriver, and putty knife. Remember to unplug your dryer from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for installation instructions.
13 - 24 of 261