EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3962 Magic Chef Microwave Oven Combo - Instructions

All Instructions for the 3962
61 - 75 of 197

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
One of the broiler drawer guides broke
1 person found this instruction helpful.
  • Jeri from NEW RICHMOND, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers
All I had to do was pull the drawer out and screw on the new part! Awesome experience...and it was so easy to find the part on the website, everything is very clear and with pictures to ensure where the part belongs...who could ask for more?
Was this helpful?
Thank you for voting!
Element in oven would not adjust to the oven temperature.
1 person found this instruction helpful.
  • Dolores from Edmond, OK
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
I ordered the temperature sensor after watching the video and seeing how easily it could be changed out. Unfortunately, they don't tell you that it may be necessary to access the part from the back. When I tried removing the sensor from inside the oven the connection separated before getting to the hole. I tried for 4 days to try to fi sh out the other end. Finally, I had my brother help me remove the oven from the wall and take the back off at which time we were able to connect the new sensory. It turns out that the wiring is on the upper right hand corner of the oven and the sensor is on the upper left hand corner and the wiring is rather short. I am a 64 year old female and do the majority of repairs around the house myself, but due to the weight of removing the oven I enlisted the help of my brother. After removing from the wall the rest was a breeze. Just wish the videos or written info on the website was a little more clear as to the different ways of accessing the damaged part.
Was this helpful?
Thank you for voting!
Oven door was locked, couldn't set oven temps
1 person found this instruction helpful.
  • William from Nashville, TN
  • Easy
  • 15 - 30 mins
  • Screw drivers
Got a bent metal coathook to temporarily release the oven door, removed the screws from the old probe, inserted the new one, and hooked it up, using the one of the plug adapters provided. Problem solved! The oven door latch was now disengaged, the oven would now accept temperature inputs, and the rear cooling fan (which wouldn't shut off) now turned off. That's a lot of things working better for less than $50!
Was this helpful?
Thank you for voting!
lens light was broken and missing.
1 person found this instruction helpful.
  • Allan from Rolla, MO
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Removed the cooktop using screwdriver. Pushed lens-light into cooktop hole.It was difficult to do and was where I spent most of my time. Next time I will spray bottom of lens- light with silicon so it goes in easier. I stood cooktop up on its side and inserted the red light assembly onto the lens-light. Reinstalled cooktop < br />and turned electrical power on.
Was this helpful?
Thank you for voting!
Our original surface element caught fire!
1 person found this instruction helpful.
  • Paulo from Cambridge Springs, PA
  • Really Easy
  • Less than 15 mins
Old surface element was removed simply by pulling it out of the electrical contacts. The, the new one was inserted.
Was this helpful?
Thank you for voting!
"F3" error message and no oven heat
1 person found this instruction helpful.
  • Pat from PAYSON, AZ
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Unplugged the range, removed screws holding the old sensor. When I pulled it out, the wire connecting to the sensor was completely broken through,therefore I could not just pull the wire to get to the connector. Unscrewed one side of back panel to access the connector. Pushed the connector and wire of the new sensor through the hole ( and behind the insulation), disconnected the old sensor and connected the new one. Re screwed the new connector in place plus rescrewed the back panel. Plugged the range in and - Viola! Everything now works like a charm and I have my oven back. Easy-Peasy. Oh - I am an older female with very limited DYI experience. I just saved myself $650.00!
Was this helpful?
Thank you for voting!
burner receptacle failed (stove over 30 years old)
1 person found this instruction helpful.
  • BETH from COUNCE, TN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.
Was this helpful?
Thank you for voting!
My original back leg broke because the floor is uneven. Had to pull it out several times.
1 person found this instruction helpful.
  • Phyllis from BROWNVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
Put the back of stove on blocks of wood to get high enough to screw the new leg in.
Was this helpful?
Thank you for voting!
Just plugged the burner in and it was good to go.
1 person found this instruction helpful.
  • Paola from High Bridge, NJ
  • Really Easy
  • Less than 15 mins
The burner wouldn't work. I just plugged in the new one and all was done.
Was this helpful?
Thank you for voting!
oven not heating to set temp. 100 degrees too cold
2 of 4 people found this instruction helpful.
  • Robert from Funston, GA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
installed part,turned unit on-temp still cold. reset digital control, up 35 degrees, still cold. un-plugged unit,re-connect after 10 min. still cold.
Was this helpful?
Thank you for voting!
F5 fault code kept appearing
1 person found this instruction helpful.
  • Louis Rodriguez from Granbury, TX
  • Very Difficult
  • More than 2 hours
  • Nutdriver, Screw drivers
I installed the new oven sensor but the problem continued. So I ordered a new relay board and installed it. Still no luck. So I pulled the new board back out and started trouble shooting it using my electronic background. I discovered the new board was using a pin for L2 that had no exit on the backplane, so I removed it and installed it where I believed it should go. Reinstalled the power relay board and presto. My oven is working lie a champ. Louis
Was this helpful?
Thank you for voting!
Oven temperature fluctuates
1 person found this instruction helpful.
  • Larry from SOLON, IA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Replaced the thermostat according to existing videos and had to adjust the thermostat using instuctions in the user manual for model CWE4800ACB.
Was this helpful?
Thank you for voting!
Jennair cooktop with coils lost one of its coil guides.
1 person found this instruction helpful.
  • Bruce from SOUTHBURY, CT
  • Really Easy
  • 30 - 60 mins
  • Socket set
We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.
Was this helpful?
Thank you for voting!
Burner plugs were loose
1 of 2 people found this instruction helpful.
  • James from CONCORD, NC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
used the supplied parts...very easy. The parts were exact replacements.
Was this helpful?
Thank you for voting!
Oven not heating to desired temp
2 of 5 people found this instruction helpful.
  • Raymond from Ridgecrest, CA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
Had to remove oven from mounting cabinet to get to the back since the wire lenght to the conector was to short to come through the mounting hole.
Other than that the repair was straight forward. 4 screws to dismount the Oven from cabinet, 2 screws to remove Sensor and 3 srews to open the back of the oven once out in the open. New cab le adapter that came with the new sensor was needed in my case.
Was this helpful?
Thank you for voting!
All Instructions for the 3962
61 - 75 of 197