38829 Toro Snow Blower - Parts

This item has been sourced from the original manufacturer and is intended to be used with snowthrowers from Toro. The metal woodruff key is used to link the motor drive shaft and the impeller pulley to allow the shaft to rotate the pulley. This woodruff key is priced as a single item.

This is a genuine Toro replacement part. The clip is commonly found in snowthrowers and lawn tractors. This part is made of metal, and is generally used to secure plate-like components in place. It may be used in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct ...Read morepart. You may require a wrench or screwdriver when replacing this part. This item is sold individually.

The ball bearing fits next to the bearing cup flange. This part is available individually and is a genuine part sourced directly from the manufacturer for use in snowthrowers by Toro and Lawn Boy. It is made out of metal and will need to be replaced if it becomes broken. A socket set and a wrench set may be needed when replacing this part.

This is a genuine manufacturer-sourced component which is specially made for use with Toro snowthrowers. It is a standard hardware which may have multiple applications. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind it is a high-quality component is ...Read moremade of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The durable plastic cover attaches to the top of the mower housing. This item is used to funnel snow and ice into the chute assembly. The cover is sold as an individual replacement part.

The Pivot Washer is an individually sold metal silver washer that alows the wheel adjust to pivot on your equipment. You will be able to tell when it breaks when the your part appears damaged or jams up when adjusting, which may happen over time due to regular wear. When the part is damaged it should be replaced. The new washer will attac...Read moreh to the spring arm assembly behind the level. This is an easy repair that requires a wrench or a socket to carry out.

This genuine manufacturer-sourced item is specially made for use with Toro and Lawn Boy snowthrowers. It is utilized to secure the bearing. Bearings are generally utilized to reduce the friction between rotating parts. The rollers help to distribute the weight while the minimal contact area reduces friction. This is an identical replaceme...Read morent for a missing or a damaged component that was installed on a new unit. One durable metal flange-cup is included. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part.

Designed for two-stage snow throwers, this steel flange-cup bearing supports the auger shaft to ensure smooth, consistent rotation during operation. Its durable metal construction helps reduce friction and wear, supporting proper auger and impeller performance in demanding winter conditions. Ideal for replacing a worn or noisy bearing, th...Read moreis component helps restore reliable operation and extend the service life of the snow blower’s drive system.

This Belleville washer, also known as a Belleville spring, is a type of cone/cup shaped washer, used in lawn and outdoor equipment. It is a thin, metal disc that tapers towards the center and functions like a spring when it is compressed. When a load is placed on the washer, the spring is engaged, and this allows it to absorb shocks and p...Read morerevent loosening and leakages while the equipment is running. It is used in places that have heavy loads and require the maintenance of high tension, such as, under the head of a fastener or in between two equipment parts. Over time, the Belleville washer can crack or become deformed leading to a loss of tension, excessive vibration, instability, and falling parts. If you are positioning the washer under a fastener, first remove the fastener before removing the faulty washer, and if it is between two components, you may first need to disassemble the components. Each washer is sold separately.