38424 Toro Snow Blower - Parts

This replacement part is supplied directly from original equipment manufacturer for use with Toro snow blowers/throwers. Scrapers are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn scraper because it will no longer be able to clear the sidewalk, leaving patches behind. Ple...Read morease note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. This scraper blade is sold individually. Replacing it is a quick and simple task that would only require a wrench to complete this repair. • Make sure the unit is off and spark plug is disconnected • Remove the scraper bolts • Pull the old scraper off of the unit • Press the new scraper onto the lip of the impeller • Secure the bolts and nuts

This replacement screw is a high quality item commonly utilized on Toro snowthrowers. It is a genuine OEM supplied hardware which has multiple uses depending on the equipment. Please make sure to check appropriate diagrams for correct location and application of this screw. This hex washer head screw is sold individually and it will require a wrench to secure of remove it.

It is an authentic OEM component which is made for Toro snowthrowers. This special spacer ensures a tight fit helping to secure the blade-rotor. It provides a high-quality replacement for a missing or a damaged hardware that was installed on a new unit. Check the diagrams of your specific model for the exact location of this component. It...Read more is made of durable metal and is sold as an individual item. Replacing it is a simple task that may only require a wrench set. Simply screw that holds the blade-rotor and replace the old spacer with the new.

This is an original Toro replacement part manufactured for use with snowthrowers. The special push on retainer fastens the handle grip to the chute crank rod. This push on retainer is sold individually, please see model diagram for additional parts.

This carriage screw is a genuine manufacturer sourced replacement part. It is specially designed for use with Toro snowblowers. This screw is generally used to secure the scraper blade. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the screw and keeps it from t...Read moreurning when the nut is tightened. Please note, this screw is made out of metal and it is sold individually.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

A genuine item that is supplied directly from the original equipment manufacturer for use with Toro snowthrowers. It is an identical replacement for a missing or damaged housing assembly that was originally installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of...Read more this hardware. Keep in mind this high-quality item is made of durable plastic material and is sold individually.

This is an authentic replacement ignition switch. It is sourced from original manufacturer and it is specially designed for use on Toro snow throwers/blowers. It allows user to start their equipment using a simple ignition turn key (sold separately). This switch has a plastic body and two metal wire terminals/prongs. Includes one (1) swit...Read morech per order. Replacing this switch is a simple task that generally does not require any tools. • Reach under cover/housing and disconnect cord from the old switch • Pull out switch • Secure new switch in place • Reconnect power cord and test the unit

This is an OEM part directly sourced from the manufacturer for use in Toro snowthrowers and Briggs & Stratton engines. The governor spring is made out of metal. During the installation process, a set of pliers might be needed to replace this item. Over time this part may break or bend and will need to be replaced. This item is available as an individual replacement part.

This is one of the half-rotors that are utilized to secure rotor blades to the rotor shaft. It is an authentic item that is supplied by original equipment manufacturer for use with Toro and Lawn Boy snowthrowers. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the diagrams and the owner's manual fo...Read morer your model to ensure the proper repair procedure. This high-quality half-rotor is made of durable metal and is sold as an individual item.