My Orders
38096 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grandson lost the ignition key to my Toro!
15 of 38 people
found this instruction helpful.
-
Michelle from AYLETT, VA
- Really Easy
- Less than 15 mins
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Was this helpful?
Thank you for voting!
Front drive wheel locked up, causing the mower to not be able to be pushed.
4 of 12 people
found this instruction helpful.
-
Walter from EVERETT, WA
- Easy
- Less than 15 mins
-
Socket set
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Was this helpful?
Thank you for voting!
Multi rounded pins worn off where the blade turned very little with th mower running.
1 of 4 people
found this instruction helpful.
-
Roger from ROSEBURG, OR
- A Bit Difficult
- 30 - 60 mins
-
Socket set, Wrench set
Once the blade was off, the blade adapter came off easily with a little help from WD40, and getting the new one on was simple with a few taps with a plastic hammer
Was this helpful?
Thank you for voting!