This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges.
Customers found this to be an easy repair.
This is a genuine Husqvarna replacement part, sold individually. Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part. This part is compatible with the Husqvarna lawn mower models that are listed below.
This grass bag frame is a genuine replacement part designed to secure the grass collection bag to the mower deck. Constructed from durable metal, it provides structural support to keep the bag in place while collecting clippings efficiently. Over time, frames can become bent or damaged due to regular use or exposure to the elements, makin...Read moreg replacement necessary for proper functionality. Installation is simple and tool-free—slide the frame into the grass bag and attach it to the mower. This OEM component matches original specifications and ensures a secure fit for reliable performance.
Husqvarna Genuine OEM Lawn mower grass deflector also called a grass shield or chute. This part is attached to the mower deck and it directs the freshly cut grass trimmings to the side. This is a Plastic Chute and it does not include the Hinge Bracket Assembly or the Hinge Rod needed to attach this part to the deck.
This genuine adjuster assembly is an original part from Husqvarna, designed for use with a variety of compatible lawn mower models. Made of durable metal, this component is installed on the right side of the mower deck and is responsible for adjusting the deck height. It allows users to raise or lower the mower deck to achieve the desired...Read more cutting height for their lawn. A wrench is recommended for removing and installing this part. The adjuster is sold individually and built to meet OEM standards for fit and performance.
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.
The fuel tank goes between the fuel tank bracket and the fuel line. This is a Tecumseh, Husqvarna, and Toro replacement part directly sourced from the manufacturer for use in engines and snowthrowers. This part holds the fuel and is priced individually. A wrench might be required during the replacement of this part. It will need to be replaced if it leaks.
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly.
This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair.
Customers rated this repair as Easy.
This is an authentic OEM self-tapping bolt used on Toro snow throwers/blowers. It is designed to secure the bushing/gear case assembly together. By using a wrench and a self tapping bolt, precisely fitted threads are created in the opening of the case. This allows for the two part to be secured tightly together. Please note this bolt is sold individually.
This Genuine OEM blade adapter is a manufacturer-sourced replacement part designed for use with select Craftsman lawn mowers. Made from durable metal and sold individually, this component serves as a direct replacement for a missing or faulty adapter, allowing the user to securely attach the mower blade to the engine shaft. A properly fun...Read morectioning blade adapter is essential for safe and efficient cutting performance.
To ensure correct fit and application, please refer to your model’s parts diagram or owner’s manual before ordering. Replacing a worn or damaged adapter helps maintain blade stability and overall mower reliability.
This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.
This is a genuine Husqvarna part for use with Husqvarna, Poulan and Jonsered Lawn Mowers. The height adjuster moves the lawn mower wheel up or down to adjust the lawn mower deck to the desired cutting height. The most common reason for replacing the height adjuster plate is if it is damaged. This part is sold individually. Here is a list ...Read moreof tools that are needed to install the left front wheel adjuster are a flat-head screwdriver, 9/16" nut driver, and a 3/8" nut driver.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My self-propelled lawnmower did not function. The front wheel assist did not work.
15 of 27 peoplefound this instruction helpful.
Russ from ALTENBURG, MO
Very Easy
Less than 15 mins
Socket set
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socke
... Read moret. It was a very easy repair.
Read less
Was this helpful?
Thank you for voting!
Bad Camshaft made of plastic
5 of 9 peoplefound this instruction helpful.
Dan from Millstone Twp, NJ
Really Easy
30 - 60 mins
Ordered a replacement camshaft and had a terrible result. Supposed to be in stock but wasn't. NO update on when the part would arrive. NO contact unless I initiated it. Only email I received stated NO information on when part would arrive. I asked for Customer service to reach out for more details and they balked, did not want to do a
... Read morenything. I insisted and the result was an email stating no idea. No further info from anyone. I figured my next step was to ask for a refund but figured it would not be refunded. I then found a "dead" engine and used THAT camshaft for my repair. Weeks later your part arrived with ZERO notice. I should have asked for a refund due to your failure to live up to your hype. ZERO stars for this junk. Will NOT ever use you again.
Read less
Was this helpful?
Thank you for voting!
Front drive wheel locked up, causing the mower to not be able to be pushed.
4 of 12 peoplefound this instruction helpful.
Walter from EVERETT, WA
Easy
Less than 15 mins
Socket set
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.