38000 - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively p...Read morelay or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

This carriage screw is a genuine manufacturer sourced replacement part. It is specially designed for use with Toro snowblowers. This screw is generally used to secure the scraper blade. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the screw and keeps it from t...Read moreurning when the nut is tightened. Please note, this screw is made out of metal and it is sold individually.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snowthrowers. this is a standard hardware which has multiple uses depending on your unit. Please make sure to check appropriate diagrams for correct location and use of this screw. Please note, one metal screw is included p...Read moreer order. You will need a wrench or a flat-head screwdriver to install or remove this screw.

It is a genuine OEM sourced replacement screw which is specially designed for use with Toro snowblowers. This hardware has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams of your model for the correct location and use of this item. It is a high-quality component which is made of du...Read morerable metal and it is sold individually, you will need a Phillips screwdriver to install or remove it.

This is a genuine Broan replacement part, sold individually. The light features a plastic bulb cover for durability and a frosted white finish to help accent your bathroom. Light lens can be easily installed with snap in action, no additional tools required. This part is compatible with the range hood models listed below.

This is an authentic replacement part manufactured for use with trimmers and snow throwers. The special key is used as a safety device used to prevent start-up when the key is removed. This key is available as an individual replacement part, please see model diagram for associative parts.

The screw is made of metal and attaches to the front panel. This is a genuine Toro and Lawn Boy part sourced directly from the manufacturer for use in snowblowers. Keep in mind that this item is sold individually. When replacing this part a flat head screwdriver might be required during the installation process. It might strip or break over time and will need replacing.

It is a genuine OEM sourced item that is specially produced for use with Toro lawn and garden equipment. This special replacement nut has multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams for correct location and use of this hardware. It is a durable metal speed-nut which is sold individually.

This part is available as an individual replacement. The nut-keps attaches to the lower bracket-housing. A wrench might be helpful during the installation of this part. This is made of metal and will require replacing if it breaks. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy snowthrowers.