EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3745 - Instructions

All Instructions for the 3745
16 - 30 of 37

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dull blade
2 of 3 people found this instruction helpful.
  • Robin from BIRCH RUN, MI
  • Very Easy
  • 15 - 30 mins
  • Socket set
Disconnected spark plug wire laid lawn mower in side removed blade bolt took off old blade put new blade on tightened it reconnected spark plug wire
Was this helpful?
Thank you for voting!
Fridge light dead even with new bulb
1 person found this instruction helpful.
  • marj from NEWBURY PARK, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1- youtubed the potential diagnoses, 2- resourced and ordered parts, 3- removed old socket, installed new one :-)... My fridge is an older fridge and could've used a screwdriver for eyeglasses. Plug and play easy... YAY!
Was this helpful?
Thank you for voting!
My light in the refrigerator was going on and off.
1 person found this instruction helpful.
  • Nan from PURCELLVILLE, VA
  • Very Easy
  • Less than 15 mins
I unplugged the refrigerator. Pressed the tab near the light bulb. Unplugged the socket and reconnected it.
Was this helpful?
Thank you for voting!
bulb out
1 person found this instruction helpful.
  • Kenneth from Rowe, VA
  • Really Easy
  • Less than 15 mins
I ordered the part, within two days we had received it. My husband put the part in and I really don't know what he used doing so. All I know is that the light works now and we don't have to use the flashlight. Thanks a lot.
Was this helpful?
Thank you for voting!
Short in the light socket.
1 of 2 people found this instruction helpful.
  • ED from ENON, OH
  • Very Easy
  • Less than 15 mins
Un Plugged the frig. Unlocked the socket by pressing down on the latch. Pulled the socket out ensuring I had enough slack. Unplugged the old socket installed the new. Plugged the frig back in. Tested the switch . Very easy-to-use.
Was this helpful?
Thank you for voting!
The control board generated clicking noise. Temperature display wrong values.
1 of 2 people found this instruction helpful.
  • QUOC-LOC from LYNN HAVEN, FL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
On the internet forum I read that if the control board needs to be changed , do the same for the Run Capacitor/relay.
The Ge profile refrigerator was 15 years old. First I disconnect the power cord,
I removed the control board at the back of the fridge, replaced it with a new one and did the same for the run capacitor.
P lugged the power cord back and it works fine. GE repair service did not want to come to do it. DIY is fine.
Was this helpful?
Thank you for voting!
Front drive wheel locked up, causing the mower to not be able to be pushed.
4 of 12 people found this instruction helpful.
  • Walter from EVERETT, WA
  • Easy
  • Less than 15 mins
  • Socket set
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Was this helpful?
Thank you for voting!
socket had melted
1 of 3 people found this instruction helpful.
  • Chris from Charlotte, NC
  • Really Easy
  • Less than 15 mins
pluged the wire harness into the new socket from the back and snaped the socket in place.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people found this instruction helpful.
  • Wayne from Issaquah, WA
  • Really Easy
  • Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
3 of 19 people found this instruction helpful.
  • Joel from ROSEVILLE, MN
  • Very Easy
  • Less than 15 mins
  • Socket set
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Was this helpful?
Thank you for voting!
fan and compressor wont start
  • JOSE from NEW YORK, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Googled the model number of refrigerator with symptoms of "refrigerator wont run". Parts select web site appeared on my screen, opened Parts Select website, Partselect said probable cause of my frige symptom was that the run capacitor usually burns out 51% of the time. They were correct with the diagnosis 100%. I ordered the run capacito r for $23.00, installed it in 10 minutes, refrigerator runs good as new. Thank you for saving me cost of service call. I probably saved $200 or more. I will use Partselect again with my next problem. THANK YOU,
Was this helpful?
Thank you for voting!
compressor running and hot, refer and fridge room temp.
  • Charles from Durham, CA
  • Really Easy
  • Less than 15 mins
Watched a youtube on capacitors- though on a motor with a pulley, the symptoms were the same, motor running and pulley not turning-bad capacitor. Took a chance for a 17+ dollar part vs a new compressor. It worked.
Was this helpful?
Thank you for voting!
light would not stay on
  • Kenneth from Leavenworth, KS
  • Easy
  • Less than 15 mins
First I flipped breaker to off position for refigerator, Pulled down on socket and broke it free. Then took needle nose piars to pull wire and plug out from hole, so I could conect to new light socket then snaped it in place . Hardest part was getting wire and plug out of hole.
Was this helpful?
Thank you for voting!
Both the fridge aqnd freezer would not get cold.
  • Mary from Farmingdale, NY
  • Easy
  • Less than 15 mins
  • Screw drivers
Easy. Followed the video instrucations. the part was right there next to the compressor.
Was this helpful?
Thank you for voting!
needed new light socket
  • Charles from Williamsburg, VA
  • Really Easy
  • Less than 15 mins
Pulled out old socket.pushed in new one.
Was this helpful?
Thank you for voting!
All Instructions for the 3745
16 - 30 of 37