Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber.
You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly.
Customers rate this repair as Easy.
This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.
This item is sourced from the original manufacturer. It is an authentic part used with riding lawn tractors/mowers. This is the switch that allows user to engage blades. To stop mower blades, place attachment clutch control in the "DISENGAGED" position. One (1) plastic switch is included per order. Mechanical switches tend to break with t...Read moreime, eventually requiring replacement. This is standard 8 terminal black switch. Replacing this switch is a simple task. • Make sure to disconnect spark plug • Once you gained access under the housing disconnect wires • Remove old switch by pushing on side tabs • Secure new PTO switch • Reconnect wires and spark plug • Test the unit
This is an OEM sourced replacement ignition switch. It is commonly used on a variety of riding lawn mowers/tractors. Switch plays an important role because it allows user to easily start the mower using only a turn key. Because switches have mechanical internal parts, over time they will begin to fail requiring replacement. It has a plast...Read moreic body and it is sold individually. Please note, the key is not included, it is sold separately. To replace this switch no tools will be needed. • Unplug the wires from an old switch • Remove the switch by squeezing tabs • Secure new switch in the opening • Reattach wires and test the new switch
It is a genuine component which is supplied directly from the original equipment manufacturer for use with Husqvarna riding lawn mowers. The purpose of this part is to provide a tight seal for the shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in m...Read moreind this high-quality seal is made of durable materials and is sold individually.
It is a genuine manufacturer-approved part which is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of the interlock switch is to act as a safety feature which will shut the engine off if the driver leaves the seat. Unfortunately, over time parts will wear out and it may...Read more begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch is sold individually. You may need a screwdriver and pliers to perform this repair.
This is a genuine manufacturer approved replacement part designed for use with chainsaws. It is used to secure starter housing to the unit. This is a metal phillips head screw which is sold individually.
This Nut is a genuine replacement part for hundreds of models of chainsaws. It is made of durable yellow plastic and is sold individually. This Nut is part of the chain tensioner and works with the tension screw to allow the user to tighten or loosen the chain.
This part will become worn over time and should be replaced if you notice an...Read morey signs of wear or damage. If you cannot adjust the bar when you turn the tension nut/screw, it usually means that this Nut is worn or damaged. You will need a screwdriver, a socket set, and a wrench set to complete this repair.
Customers rate this repair as Easy.
This is a genuine Husqvarna and Jonsered part sourced directly from the manufacturer. The metal piston ring is for use in blowers and attaches to the piston. Piston rings help in the sealing of the combustion chamber. It may become bent or broken and will require replacing. This is available as an individual replacement part, but two may be required for installation.
This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.
This is an authentic replacement part sourced directly from the manufacturer. The cap is commonly found in Craftsman lawn tractors. This part is placed on the end of the torsion spring to keep it from damaging the deflector shield. You may require a wrench and pliers when replacing this item. The cap is available as an individual replacement part.
This is an authentic OEM sourced replacement part designed for use with Husqvarna chainsaws. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged. This part is made out of metal and it is sold individually. To complete this repair you would need a screwdriver.