EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3710 - Parts

1 - 12 of 132

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Power Cord – Part Number: 664064-4
$34.66
In Stock
Power Cord
Part #664064-4
Length 8 Foot Length: 6' Gauge: 18 Wires: 2 Type: Bare Wire This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individually. It comes with a rubber sleeve grommet that is not sold separately. Replacing this power supply cord you will need a screwdriver. • Remove the housing screws • Remove the the housing • Disconnect the old cord wires • Remove the old power cord • Secure the new cord in place • Connect the wires • Reassemble and test the new cord
Brush Card Asm – Part Number: 35452A
$58.11
In Stock
Brush Card Asm
Part #35452A
Screw – Part Number: 650820
$6.30
In Stock
Screw
Part #650820
Screw, T-30 Hex Washer Hd Sems – Part Number: 30063
$6.40
In Stock
Tapping Screw 4x18 – Part Number: 266326-2
$6.40
In Stock
Tapping Screw 4x18
Part #266326-2
This tapping screw is an authentic hardware that is supplied by original tool manufacturer for use with a variety of Makita power tools. It has multiple uses depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this screw. Note this durable metal screw is sold individually.
Carbon Brush Set – Part Number: CB408
$18.87
In Stock
Carbon Brush Set
Part #CB408
This #191938-1 (CB-408) Makita carbon brush set contains two individual carbon brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Screw – Part Number: 650819
$6.40
Special Order
Screw
Part #650819
Spring Washer 6 – Part Number: 253428-3
$6.40
In Stock
Spring Washer 6
Part #253428-3
This part is available individually. The spring washer fits between the wing nut and the flat washer. This washer is small and will need to be replaced if it gets lost or if it breaks. It is made out of metal and no tools should be necessary when replacing this item. This is an OEM Makita part directly sourced from the manufacturer for use with saws, cutters, planers, drills, and trimmers.
Pin 3 – Part Number: 256158-5
$6.40
In Stock
Pin 3
Part #256158-5
This replacement pin is an authentic OEM component which is made for use with Makita equipment. The pin is generally utilized to secure a part while allowing it to rotate freely. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams of your model for the exact location and the correct installation of this pin. One durable metal item is included. You may need a screwdriver to take the unit apart when replacing this pin.
O-Ring – Part Number: 35450
$6.40
In Stock
O-Ring
Part #35450
Base Cpl,, 3707fc – Part Number: 143654-1
$21.26
Special Order
Base Cpl,, 3707fc
Part #143654-1
Flat Washer 5 – Part Number: 941101-4
$6.40
In Stock
Flat Washer 5
Part #941101-4
This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and planers. The flat washer is used with different types of power tools and the application of the washer can vary based on the model of the equipment. This item is available as an individual replacement part.
1 - 12 of 132