3708 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear flap had deteriorated.
3 of 4 people
found this instruction helpful.
-
David from PITTSBURGH, PA
- A Bit Difficult
- 30 - 60 mins
-
Pliers
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this helpful?
Thank you for voting!
Old power cord frayed at the grommet entering the drill casing
4 of 13 people
found this instruction helpful.
-
Bruce from HILLSBORO, OR
- Very Difficult
- 30 - 60 mins
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Was this helpful?
Thank you for voting!