EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

37-01 Range - Instructions

All Instructions for the 37-01
16 - 30 of 98

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed new drip bowls.
7 of 9 people found this instruction helpful.
  • Robert from Oradell, NJ
  • Really Easy
  • Less than 15 mins
Pulled out heating elements. Removed old drip bowls. Inserted new drip bowls and re-installed heating elements.

I was extremely pleased with the very quick delivery of needed parts.
Was this helpful?
Thank you for voting!
OLD STOVETOP COILS
6 of 6 people found this instruction helpful.
  • SANDY from TOMAH, WI
  • Very Easy
  • Less than 15 mins
LOOKED FOR MODEL# OF STOVE.. ENTERED MODEL # IN PARTS.COM SEARCH.
MATCHED COIL AND DRIP PANS
ITEM NUMBERS AND SIZE.
PLACED ORDER.
ARRIVED FOLLOWING WEEK WELL PACKED.
PULLED OUT OLD COILS/DRIP PANS.
PLACE *NEW* DRIP PANS IN FIRST. THEN PUSH IN *NEW* COILS
**NO PAID INVOICE WAS RECEIVED**
We d4/24/2024
Was this helpful?
Thank you for voting!
The elements were not heating up
6 of 8 people found this instruction helpful.
  • Tanya from KALISPELL, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people found this instruction helpful.
  • ANGELA from MEBANE, NC
  • Very Easy
  • Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Couldn't find replacement trays locally. Part Select was very helpful and prompt in shipping.
5 of 7 people found this instruction helpful.
  • Rosemary from St. Albans, ME
  • Really Easy
  • Less than 15 mins
Just placed the chrome bowl trays in place and was good to go. They look very nice.
Was this helpful?
Thank you for voting!
Coroded drip pans
4 of 5 people found this instruction helpful.
  • Lori from Old Town, FL
  • Really Easy
  • Less than 15 mins
Removed heating elements and replaced drip pans. And by the way, this is the only 'pans' I could find to fit. Thanks.
Was this helpful?
Thank you for voting!
Front left burner would not shut off, then switch fried
5 of 8 people found this instruction helpful.
  • connie from madison, NC
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplug range, remove top back panel. Remove knob. Replacement part is different, but if you look closely, each metal tab has a number stamped on the plastic housing directly beneth it. Remove old switch (2 screws)and remove and replace wires one at a time. You will need to cut the "one size fits all" metal shaft that the knob attaches to. We had to remove most of it, leaving only 2 "segments". File rough edges and apply vaseline so that the plastic sleeve will slip right on. We used the shorter sleeve (only 2 that are supplied will fit the knob). Replace unit and screw in. Replace knob.
Was this helpful?
Thank you for voting!
Switches were going bad and making a popping sound and smoking.
4 of 5 people found this instruction helpful.
  • Joshua from Homestead, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers
Pulled out the range, unplugged it and removed the upper back panel. The switches were held in place with two screws. Removed the old switches, detached the wires and plugged them into the new switches. Mounted the new switches, replaced the back panel, plugged the range back in and pushed it back into position. Appliance repair compa ny wanted $370. I did it in 45 min. for less than $100.
Was this helpful?
Thank you for voting!
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
3 of 3 people found this instruction helpful.
  • Daniel from Falmouth, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench set
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Was this helpful?
Thank you for voting!
Drip bowels needed to be replaced
3 of 3 people found this instruction helpful.
  • Francine from OTEGO, NY
  • Very Easy
  • Less than 15 mins
I just took the old ones out and replaced them with the new ones. It took less than 5 minutes.
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people found this instruction helpful.
  • Alan from SAN MATEO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
surface element burned out
3 of 3 people found this instruction helpful.
  • Robert from SEEKONK, MA
  • Very Easy
  • Less than 15 mins
Simple Just plugged it in !
Was this helpful?
Thank you for voting!
element had been damaged
4 of 7 people found this instruction helpful.
  • Merle from Towanda, PA
  • Really Easy
  • Less than 15 mins
I unplugged the damaged element and plugged in the new one. It took less trhan 30 seconds and the unit worked just fine.
Was this helpful?
Thank you for voting!
Heating element for a frigidaire stove top broke
2 of 2 people found this instruction helpful.
  • Rebecca from ASHEVILLE, NC
  • Very Easy
  • Less than 15 mins
Got the shipment. Took it out of the package. Set it into the stove top. Tested to see if it worked, It did. Turned it off and took my dog for a walk.
Great company. Makes it easy for me order.
Was this helpful?
Thank you for voting!
Burner not heating up.
2 of 2 people found this instruction helpful.
  • Arlene from ERIE, IL
  • Very Easy
  • Less than 15 mins
Unpluged old one pluged new one in. So good to have a burner that all the coils heat up.
Was this helpful?
Thank you for voting!
All Instructions for the 37-01
16 - 30 of 98