3641 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
There was frequently a loud buzzing sound that would come from the freezer.
2 of 2 people
found this instruction helpful.
-
Jeffrey from SIOUX FALLS, SD
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
I wouldn't have tried it without the excellent YouTube video that gave step-by-step instructions! I set up a laptop next to the refrigerator and watched each step then did it myself.
The instructions were very detailed and all of the parts looked exactly like what I was seeing. The only difference was that I didn't need to re ... Read more move the floor of the freezer to get to the fan motor.
I bought the fan motor, grommets (2), compression ring and fan blade because I wasn't sure which part was causing the problem, and figured that as long as I was in there I might as well put in all new parts.
As it turned out, I did not need the compression ring, because the new fan blade came with a compression ring on it. This was different from what was shown in the video.
Since doing the repair the freezer is now as quiet as it should be, which is a great relief. The project and the money spent were more than worth it. It was great not having to pay a repair man to do the work!
The instructions were very detailed and all of the parts looked exactly like what I was seeing. The only difference was that I didn't need to re ... Read more move the floor of the freezer to get to the fan motor.
I bought the fan motor, grommets (2), compression ring and fan blade because I wasn't sure which part was causing the problem, and figured that as long as I was in there I might as well put in all new parts.
As it turned out, I did not need the compression ring, because the new fan blade came with a compression ring on it. This was different from what was shown in the video.
Since doing the repair the freezer is now as quiet as it should be, which is a great relief. The project and the money spent were more than worth it. It was great not having to pay a repair man to do the work!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer was wet and there was no air coming out of the freezer fan. Unit was very noisy too.
2 of 2 people
found this instruction helpful.
-
Robert from BOULDER, CO
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
The video that was attached to the part order was good, but not exactly the same as my unit. One thing I recommend is that you cover up the drain below the evaporator coil with a piece of paper and tape it down, because as I was putting the motor back I dropped a screw and it fell down the drain. So I had to go buy a new screw.
Gi ... Read more ve the cost of a repair man coming to fix a refrigerator that cost only $450 to begin with, doing this repair was well worth my time. (But I also had another refrigerator to move things to and could take my time and wait while they replaced the faulty part they shipped me.)
Gi ... Read more ve the cost of a repair man coming to fix a refrigerator that cost only $450 to begin with, doing this repair was well worth my time. (But I also had another refrigerator to move things to and could take my time and wait while they replaced the faulty part they shipped me.)
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
The fan got very noisy.
2 of 2 people
found this instruction helpful.
-
Carol from ORANGE, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
My husband did the repair in 45 minutes and said it was very easy. The video made everything plain and simple.
Was this helpful?
Thank you for voting!
Defroster fan burned up
3 of 6 people
found this instruction helpful.
-
Peter M. from Lincoln Park, NJ
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
First I removed the ice tray rack lifting it out of the way to reach the back cover of the fan. Then, the whole back inside panel had to be removed. Two screws removed the fan and bracket from the freezer unit. The missing bumper lid just snapped into place. Replaced everything in reverse order. Pretty easy job.
Was this helpful?
Thank you for voting!
the condenser fan motor was intermittently verynoisy. obvious sign of a (possibly imminent) failure
2 of 3 people
found this instruction helpful.
-
Herbert from POCONO LAKE, PA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
1 unplug the appliance
2. remove the rear cardboard cover, giving access to the compressor and condenser area
3. remove the two (condenser motor bracket) mounting screws, then with the motor assembly in your hand remove the the fan blade which is friction mounted to the motor shaft( note the exact position of the fan blade on t ... Read more he motor shaft so you can replace it in the same position when you reassemble), remove the two wires connected to the motor. Also remove the rubber resilient mounting grommets on the motor mount frame as these can harden with age and cause excessive vibration.
4 install the new motor into the mounting frame with the new grommets
5 reconnect the two wires to the new motor (non polarized)
6 secure the mounting frame (with the installed new motor) back in place
7 slide the fan blade onto the new motor shaft
8 screw the rear access panel back in place
plug in the refrigerator. the next time the compressor and condenser fan cycle on, verify operation of the new condenser fan motor
2. remove the rear cardboard cover, giving access to the compressor and condenser area
3. remove the two (condenser motor bracket) mounting screws, then with the motor assembly in your hand remove the the fan blade which is friction mounted to the motor shaft( note the exact position of the fan blade on t ... Read more he motor shaft so you can replace it in the same position when you reassemble), remove the two wires connected to the motor. Also remove the rubber resilient mounting grommets on the motor mount frame as these can harden with age and cause excessive vibration.
4 install the new motor into the mounting frame with the new grommets
5 reconnect the two wires to the new motor (non polarized)
6 secure the mounting frame (with the installed new motor) back in place
7 slide the fan blade onto the new motor shaft
8 screw the rear access panel back in place
plug in the refrigerator. the next time the compressor and condenser fan cycle on, verify operation of the new condenser fan motor
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Fridge making LOUD humming sound.
2 of 3 people
found this instruction helpful.
-
jack from homestead, FL
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Started removing screws until I got to the fan (it's easy). Then just took out the old fan and put the new one back in the same way. The only challenging part was putting the clamp back on the fan, but I finally got it. The fridge is finally quiet and we can sleep again! PartSelect made it really easy and they were incredibly fast. Than
... Read more
ks!
Read less
Was this helpful?
Thank you for voting!
plastic broke on edges
2 of 3 people
found this instruction helpful.
-
James from ROCKINGHAM, VA
- Very Easy
- Less than 15 mins
pulled out old, inserted new
Other Parts Used:
Was this helpful?
Thank you for voting!
Light would no longer turn on
3 of 6 people
found this instruction helpful.
-
paypal_shipping_address from Ripon, CA
- Really Easy
- Less than 15 mins
-
Pliers
I watched the video online, followed the instructions and within minutes had the part installed. The frig light was working once again! I will say the original switch was very snug and I had to do some very minor scraping of the plastic to get the new part to slide in.
Was this helpful?
Thank you for voting!
Old fan motor was knocking and not running well
2 of 3 people
found this instruction helpful.
-
Jacky from Richland, GA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Watched your repair video online. appeared very simple and straight forward. Order the parts in question. They were shipped quickly. Once parts in hand watched video again and then installed new motor and blade in less than ten minutes. Plug power back in and and new part works perfectly. Thanks for helping make it an easy process. J
... Read more
. Smith
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Light out
2 of 3 people
found this instruction helpful.
-
Jodi from Benton Harbor, MI
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Turned off the breaker to the fridge because I couldn't reach the power plug to unplug it . Use small flat head screwdriver to pop out the piece, disconnected the rubber prong connectors, inserted the new piece into the rubber prongs snapped it back into place. Flipped the breaker back on and prayed it worked. It did and I saved myself $
... Read more
120 service call.
Read less
Was this helpful?
Thank you for voting!
Refrigerator dooe retainers
2 of 3 people
found this instruction helpful.
-
James from Dennisport, FL
- Easy
- Less than 15 mins
Ordered and received wrong retainer bar caps. Your customer service was knowledgeable of and corrected problem in a timely manner. Wish upon initial order that Dept. would have questioned fact that ordered end caps would not fit the retainer bar end caps. This has all been resolved and repair was successful.
Other Parts Used:
Was this helpful?
Thank you for voting!
condiment shelf bar broken
2 of 3 people
found this instruction helpful.
-
William from Durham, NH
- Really Easy
- Less than 15 mins
easy repair
3rd time I've used Partselect, always easy, always the right part, always fast.
3rd time I've used Partselect, always easy, always the right part, always fast.
Other Parts Used:
Was this helpful?
Thank you for voting!
Bent retainer Bars
2 of 3 people
found this instruction helpful.
-
Donald from Aurora, CO
- Really Easy
- Less than 15 mins
Real Problem is the snap that the ends go into the refigerator the hole is broken and the end will not hold it. Can I glue it or somthing ?
Other Parts Used:
Was this helpful?
Thank you for voting!
Noise in the back of freezer
3 of 6 people
found this instruction helpful.
-
MaryLou from Levittown, NY
- A Bit Difficult
- Less than 15 mins
I must thank yo for sending the fan so fast. If I ever have to deal with any appliance again, you are first on my list.
Was this helpful?
Thank you for voting!
Light would stay on when door closed
3 of 7 people
found this instruction helpful.
-
James from Glendale Heights, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Extremely easy repair, the hardest part was getting the old switch out. I used a pair of needle nose pliers to squeeze the tabs in and it came right out.
Was this helpful?
Thank you for voting!