EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3639714 Kenmore Refrigerator - Instructions

All Instructions for the 3639714
31 - 45 of 270

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken vegetable tray
7 of 7 people found this instruction helpful.
  • Kerri from Marshfield, MA
  • Really Easy
  • Less than 15 mins
After looking at our broken bottom shelf in the fridge many times a day for over a year, I finally got around to doing something about it. So glad that I did! First of all, the part was shipped amazingly quickly. I had it within two days (at regular shipping). Secondly, it was a cinch to install. What a world of difference!
The only caveat is that the new shelf fits quite snugly. If you don't give the refrigerator door an extra push to close it, the door does not seal. Just a new habit we have to get into.
Was this helpful?
Thank you for voting!
ineffective frige door gasket due to stretching
8 of 10 people found this instruction helpful.
  • Anita from Shawnee, OK
  • Easy
  • Less than 15 mins
I pulled off the old gasket and pressed in the new one. That's it!
Was this helpful?
Thank you for voting!
Broken gear
8 of 10 people found this instruction helpful.
  • D.H. from Mulberry, AL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed old gear and tapped the replacement on.
Was this helpful?
Thank you for voting!
mositure and tempature
8 of 11 people found this instruction helpful.
  • Mark from Cheraw, SC
  • Easy
  • 30 - 60 mins
First the Kenmore refrigerator was listed as most parts as not available on the Sears web site.
The old gasket was split in several places and moisture and mildew was part of the clean up. Because of the cold weather at the time of shipment the note about using warm water to soften the gasket so it would be more pliable was extremely helpful.
I was also reversing the door swing and found that it was not that hard , it took about 45 minutes and was done the 24ft frig is now working great
Thank

Mark
Was this helpful?
Thank you for voting!
Ice maker would not shut off
8 of 12 people found this instruction helpful.
  • Jack from Bloomington, IL
  • Easy
  • 15 - 30 mins
Removed the ice maker from the freezer. Removed the switch. Tested the switch with a multimeter. Ordered a new switch. Replaced it in the box. Installed the ice maker ( 3screws and electric cord plug. It works. Details available on the internet.
Was this helpful?
Thank you for voting!
My ice maker quit making ice.
8 of 12 people found this instruction helpful.
  • Steve from Louisville, KY
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the maker from the freezer, three phillps head screws, I pulled off the white plastic cover and found the top (small) gear had poped out, after carefull inspection, I notice two missing teeth. I ordered a new gear from ParstSelect re-installed and with in two days my ice maker was working like new. I estimate I saved myself seve al hundred dollars, my wife wanted to call a service professional or worse buy a new refrigerator freezer. Thanks PartSelect!
Was this helpful?
Thank you for voting!
Not enough shelf space
7 of 9 people found this instruction helpful.
  • Suzanne from Brooklyn, NY
  • Really Easy
  • Less than 15 mins
At this time of the year our beach fridge is always full of food and drinks. Every time we want something it meant leaving the door open for extended time whlie moving things left, right and center. When the new shelf arrived I removed the food and drinks from the existing two shelves and moved them closer together. I then slipped in the new shelf and reloaded the food. Suffice to say the fridge stays open less and we are able to get at things without moving others. I wish I had thought to do this before.
Was this helpful?
Thank you for voting!
no shelf in my freezer
7 of 11 people found this instruction helpful.
  • Barbara from Brookfield, IL
  • Really Easy
  • Less than 15 mins
first I ordered parts that didn't work. the return process was painless and I found the part I needed, which just popped right in!
Was this helpful?
Thank you for voting!
missing center cover slide for vegetable bins
6 of 8 people found this instruction helpful.
  • Jean from Tucson, AZ
  • Really Easy
  • Less than 15 mins
I took out the vegetable bins and slid in the part. Replaced vegetable bins. Works perfect. I was told locally that GE doesn't make the part any more and that I wouldn't be able to find one. First place I looked on the net was you and found it with no trouble at all. really thrilled to get it. Thanks
Was this helpful?
Thank you for voting!
Unit had stopped making ice
5 of 5 people found this instruction helpful.
  • Ron from ORANGE, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Ordered the icemaker replacement. unplugged the unit, followed the simple instructions and got it done in less than 30 minutes. It did take a LONG time to start making ice. But it's working now.
Was this helpful?
Thank you for voting!
Ice Maker would not fill.
5 of 6 people found this instruction helpful.
  • Charles from Keller, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
Was concerned that new icemaker was quite a bit different than the one we were replacing. Called GE to confirm it was correct.

Went ahead and installed the unit, using the supplied electric cable adapter.

A little difficult to deal with the extra cable, but everything worked OK and it's making ice normally.
Was this helpful?
Thank you for voting!
the plastic vegitable bin cracked
5 of 6 people found this instruction helpful.
  • Catherine from Clinton Twp., MI
  • Really Easy
  • Less than 15 mins
even my three year old grandson could do this one! open the door slide the old tray all the way out and slide the new one in. wha-la! Actually I was very impressed at the ordering process since I could actually see a picture of the bin in its actual use not just some obscure number with a vague discription. I'm a visual person so this made it extremely easy to see what I was ordering. No guess work.
Was this helpful?
Thank you for voting!
Ice bucket cracked
6 of 9 people found this instruction helpful.
  • Betty from Downers Grove, IL
  • Really Easy
  • Less than 15 mins
We have an older model refrigerator and thought it would be impossible to find a replacement ice bucket for the freezer. Not only did you have the exact part but it came unbelieveably fast. I would use your website again!
Was this helpful?
Thank you for voting!
broken auger in the bucket assembly.
6 of 9 people found this instruction helpful.
  • Chip from Mandeville, LA
  • Easy
  • Less than 15 mins
  • Nutdriver
I ordered the wrong part, the ice maker assembly, because your diagram was not marked properly. I returned the part and you credited my account. Thanks. Ordered the new bucket. It worked fine. Now I have ice and crushed Ice whenever I want. Thanks.

p.s. I didnt use any tools, but to satisfy you I select nut driver.
Was this helpful?
Thank you for voting!
missing a shelf
6 of 10 people found this instruction helpful.
  • Joseph from Rome, NY
  • Really Easy
  • Less than 15 mins
My repair was simple. Just put the shelf in the holes in the freezer. The AMAZING thing was how quickly I recieved the part after placing my order. I placed the order at about 3:30 pm on a friday checked the box for ground shipping and the part was at my door the next morning. I think that was a mistake, but I was impressed.
Was this helpful?
Thank you for voting!
All Instructions for the 3639714
31 - 45 of 270