- Home
- 3639534721
- Instructions
3639534721 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice maker Auger and ice was rusty.
3 of 5 people
found this instruction helpful.
-
David from Danbury, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Pull out the old, dump the nasty ice. Remove 4 screws attached to the front cover. throw in trash, replace with new auger assembly, with 4 screws. Put it back in ice maker and let it make ice. Easy, cheap and never left the house to searc for the right part, found it on the front porch.
Was this helpful?
Thank you for voting!
No water through door dispenser
2 of 3 people
found this instruction helpful.
-
Roger from Colleyville, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced flapper valve per website instructions. GE factory technician took two weeks to get here, charged over $100 for the call and told us we needed a new refrigerator door at a cost of over $500 to fix the problem. We sent him packing. After visiting the PartSelect website, the $5.88 PartSelect flapper valve fixed the problem. Ama
... Read more
zing.
Read less
Was this helpful?
Thank you for voting!
The freezer light shield was broken.
2 of 3 people
found this instruction helpful.
-
Fred from Union, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the ice maker,removed the broken piece of the old light shield,screwed the new light shield in place,and replaced the ice maker.It took all of 5 minutes.
Was this helpful?
Thank you for voting!
The icemaker quit making ice and the water started forming on the bottom of the ice bucket.
2 of 3 people
found this instruction helpful.
-
John from Anaheim, CA
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers, Wrench (Adjustable)
First I removed the electrical plug from the back of the freezer that plugs into the icemaker. I then removed the two hex head screws that hold the icemaker to the wall of the freezer and removed the icemaker. I removed the plastic cover, which incidentally protects the gears, by prying it off with a srewdriver. I removed three small nuts
... Read more
(7mm) which holds the internal cam in place. I removed the cam by pulling it off the shaft. Once I got the part from you folks I reversed the procedure that I just mentioned, and put the icemaker back together. It works great. The part with shipping was around $16.00. A new icemaker was roughly $159.00. If I would have called a technician it would have cost around $300.00 to repair.
Read less
Was this helpful?
Thank you for voting!
making rust in ice
2 of 3 people
found this instruction helpful.
-
Cindy from Yorba Linda, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
This is the easiest thing in the world - thanks for sharing other's installation - it took 5 mins - works perfect & we have clean ice - 4 easy screws to remove - anyone can do it!
Was this helpful?
Thank you for voting!
Light Shield Broke Off
2 of 3 people
found this instruction helpful.
-
Travis from Hillsboro, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
The light shield is only held in with a single screw, so it was the simplest install ever - unscrew the old light shield (in my case, the remaining piece of the light shield), put the new shield in place, and screw it down. Doesn't get any easier than that.
Was this helpful?
Thank you for voting!
ice maker was rusty
2 of 3 people
found this instruction helpful.
-
bryan from miamif, FL
- Really Easy
- Less than 15 mins
i ordered this ice maker on sunday night and paid for the cheapest shipping. it got here monday morning and i couldnt believe it. super fast shipping!! works great
Was this helpful?
Thank you for voting!
Ice maker stopped making ice
2 of 3 people
found this instruction helpful.
-
Robert from Wyckoff, NJ
- Easy
- 15 - 30 mins
-
Screw drivers
I had made a dry run at the repair after watching the instructional film provided by part select and it seemed easy enough.
The only problem was that i needed to use the electrical cord extender (provided) to adapt to my plug type. That presented a problm because it needed to be tucked up out of the way to allow the ice bin to clear ... Read more . Just needed to be creative in how you wrapped the cord behind the ice maker unit before snugging the attachment screws.
Cranking out ice like crazy.
The only problem was that i needed to use the electrical cord extender (provided) to adapt to my plug type. That presented a problm because it needed to be tucked up out of the way to allow the ice bin to clear ... Read more . Just needed to be creative in how you wrapped the cord behind the ice maker unit before snugging the attachment screws.
Cranking out ice like crazy.
Read less
Was this helpful?
Thank you for voting!
Blade on auger became stripped
2 of 3 people
found this instruction helpful.
-
Raymond from Niverville, NY
- Really Easy
- 15 - 30 mins
-
Screw drivers
Ordered at PartSelect and received the auger and blade within days. Printed the parts diagram and proceeded to take the auger apart the time it took would have been much less but I seized the opportunity to do a deep cleaning of the old parts before replacing them....The part diagram was the key to simplicity and the fast shipping was aw
... Read more
esome. Thanks I'll be back....
Read less
Was this helpful?
Thank you for voting!
Ice maker crushed all ice and would not make cubes. Pushing the switch and changing to cubes did not work.
2 of 3 people
found this instruction helpful.
-
Walter from Wyndmoor, PA
- Easy
- 15 - 30 mins
-
Screw drivers
Removed old ice bucket with auger. Unscrewed front plates that form the front of the ice bucket. Replaced the front plates on the new part (ice bucket and auger). Replaced new assemblage. It took about 20 minutes. Had to empty ice out and put in a temporary cooler for storage. Bigger problem than the repair was diagnosing what was wrong
... Read more
. Pushed disagnose button and it said ice maker was working normallly. Careful examination of the ice bucket removed from refrigerator showed spring out of place on long metal rod that protrudes from the back of the ice bucket and fits into a square hole in back of refrigerator. Examined other end of rod that engages with plastic parts that run the ice auger and ice crusher mechanism. A piece must have broken off. That was the problem. Refrigerator ice maker now works fine as originally designed. Push crudh the ice crusher engages and you get crused ice. Push cubes and the icemaker crusher slides out of the way and you get cubes.
Read less
Was this helpful?
Thank you for voting!
Refrigerator door won't close
3 of 6 people
found this instruction helpful.
-
CYNTHIA from NEWARK, DE
- Easy
- 15 - 30 mins
-
Wrench (Adjustable)
First I removed the top hinge of the refrigerator door and then lifted it off the bottom assembly. I had to turn the door on its side to work on the bottom where the broken part was located. I unscrewed the bottom assembly and replaced the broken part with the new door cam. Put it all back together and now the door closes but must be manu
... Read more
ally pushed to close. When the door was working properly it would shut automatically when released from any position. I think I need to install an additional part - maybe a shim? to make it close automatically. That will be another story.
This was a fairly simple jog to do but since I did not have the proper tools it did take me longer than usual to remove the bolts. I'm happy I did it myself and saved a big repair bill! Thanks to the people at PartSelect.com.
This was a fairly simple jog to do but since I did not have the proper tools it did take me longer than usual to remove the bolts. I'm happy I did it myself and saved a big repair bill! Thanks to the people at PartSelect.com.
Read less
Was this helpful?
Thank you for voting!
frost/ice buildup in icemaker chute in the freezer door
2 of 3 people
found this instruction helpful.
-
Kyoko from Bellevue, WA
- Easy
- 30 - 60 mins
-
Screw drivers
The only difficult part was not knowing which parts had to be removed to gain access to the flapper to replace it. It appeared as if the frame around the control panel would have to be removed as well as the door handle; we tried but were not able to remove the frame. It turned out that the panel just popped out with the frame in place. O
... Read more
nce we had access to the flapper, it was easy to replace it. The repair fixed the problem.
Read less
Was this helpful?
Thank you for voting!
Crushed Ice Only
2 of 3 people
found this instruction helpful.
-
Allen from Hills, IA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
Let me start by saying, I usually hire something like this out but figured I would give it a try. The install was fairly straight forward, however it would’ve been nice if the instructions would have been more useful. Instructing me to remove one screw to release the auger and solenoid enclosure wouldve been nice. There were 3 other screw
... Read more
s that I didn’t need to remove and they were the ones holding the auger in place, which made assembling that much more difficult. Once to enclosure was removed, and the solenoid was exposed, it was a seemless process. I would however, recommend paying attention to or taking a picture of the connections on the solenoid. I was lucky to remember or got lucky. Regardless, I was able to complete the project successfully. If I had to do it again, I believe it can be done in 30 minutes or less.
Read less
Was this helpful?
Thank you for voting!
Original part cracked allowing crushing fingers to grab plastic guide jamming it.
1 person
found this instruction helpful.
-
Barry from SUN VALLEY, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
Part attaches to metal plate near crushing fingers which attaches to ice holding bin. Remove about 6 screws total on each side of plate. You must disassemble the auger & other parts so you can reassemble it in the proper order. Not many parts but i always take pics to cut down on time. New part is at the other end of the auger and acts a
... Read more
s the holde of the auger shaft. Picture a crankshaft with a bearing on each end so the auger rotates between new part and the other end of auger shaft. That's it.
Read less
Was this helpful?
Thank you for voting!
On the water dispenser line, the heat from the compressor unit had cracked the feed line, resulting in a leak.
1 person
found this instruction helpful.
-
Walter from SANDIA PARK, NM
- Really Easy
- 30 - 60 mins
-
Nutdriver
I removed the plate covering the water valve for the ice maker and water dispenser, removed the nut holding the 5/16" tubing to the valve and took off the tubing and nut. I did not need to turn off the water supply or unplug the unit. I removed the kick panel in the bottom front of the refrigerator, replaced the existing plastic fitting w
... Read more
ith a new push-on fitting, then spliced the tubing coming from the water chiller to the valve where the leak was thus bypassing the broken tubing with new tubing. I reassembled the valve using the original plastic compression nut, replaced the cover and ran the water dispenser while checking for leaks. The water dispanser works great with no leaks.
Read less
Was this helpful?
Thank you for voting!