This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic and is approximately one inch in diameter. If your grommet is torn or damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer.
Reduce friction at the door pivot with this refrigerator nylon hinge washer. It fits over the hinge pin to provide a smooth contact surface and maintain proper spacing between hinge components. A worn, cracked, or missing washer may cause squeaking, scraping, sagging, or uneven door movement. Replacing a damaged washer helps restore corre...Read morect spacing and smoother opening and closing. Empty the door shelves and securely support the door before removing hinge hardware, then check that the door swings freely and closes evenly after reassembly. This is an OEM part sourced directly from the manufacturer.
This is the replacement vegetable drawer side rail for the left side of your refrigerator. It is made of white plastic and is approximately 18 inches long, and 6 inches wide. The slide rail supports the crisper drawer as it slides in and out. If the slide rail is broken, you may have difficulty sliding the drawer in and out. This rail is ...Read morefor the left side of the drawer, and the slide for the right side is sold separately. This part is sold individually and is and OEM part.
This slide cover or slide rail is a genuine OEM replacement part for your refrigerator. This part is made of white plastic. To install it, simply remove the glass shelf, remove the current slide rail and put the new one in place.
Cover an unused mounting hole with this refrigerator reversible door plug. It snaps into the opening left when door hardware moves to the opposite side, giving the door a neat, finished appearance. The plug also helps keep dirt and debris from collecting inside the exposed hole. A cracked plug or broken retaining tabs may cause it to sit ...Read moreloosely or fall out. Replacing a damaged or missing plug restores a tidy surface. Clean the opening before pressing the replacement gently into place. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
freezer coil frozen solid
28 of 45 peoplefound this instruction helpful.
David from Greenfield, IN
Easy
30 - 60 mins
Nutdriver, Screw drivers
Removed the back cover of freezer to acess the coil. Turned the timer to defrost and checked the voltage across the heater. Didn't have any. Stayed on the common side of heater and measured on both sides of thermostat and one side didn't have any voltage. Shorted the thermostat wires together and heater started working.
Was this helpful?
Thank you for voting!
missing center cover slide for vegetable bins
6 of 8 peoplefound this instruction helpful.
Jean from Tucson, AZ
Really Easy
Less than 15 mins
I took out the vegetable bins and slid in the part. Replaced vegetable bins. Works perfect. I was told locally that GE doesn't make the part any more and that I wouldn't be able to find one. First place I looked on the net was you and found it with no trouble at all. really thrilled to get it. Thanks
Was this helpful?
Thank you for voting!
the plastic part had broken and wouldn't support drawer
2 of 3 peoplefound this instruction helpful.
Beverly from Pensacola, FL
A Bit Difficult
More than 2 hours
Screw drivers
Replacing the new part wasn't hard, just very time consuming and frustrating. I had to remove two-thirds of the shelving of refrigerator as broken drawer slide was on the bottom and I had to have room to remove old and replace new. Of course, then I had to CLEAN all the drawers and shelving before replacing them and then, because they w
... Read moreere fresh and clean, I had to remove the other third of shelving and wash and replace it. So, it was an hour-long or more time. I love your business, and had no idea I could get so many parts for old applicance and replace them myself, and I am a 70-year-old woman! This was the 2nd time to use your site and I will return to it again when needed. Thanks for prompt and reliable service and a site that makes it easy for a neophyte like me to find the broken part ! Keep up the good work.