3627521 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Well used burners..
7 of 16 people
found this instruction helpful.
-
Melissa from Mastic Beach, NY
- Really Easy
- Less than 15 mins
Replaced the old with the new parts...stove like new...very pleased with the improved function and appearance of stove.
Other Parts Used:
Was this helpful?
Thank you for voting!
Missing Burner Caps.
3 of 5 people
found this instruction helpful.
-
GLENDA from HENDERSON, NV
- Really Easy
- Less than 15 mins
Caps were shipping very quickly. Price was very reasonable. Very happy with parts-selects service.
Other Parts Used:
Was this helpful?
Thank you for voting!
GOT 1-SMALL 2-MEDIUM 0-LARGE CAPS
2 of 2 people
found this instruction helpful.
-
Teddy from Bel Air, MD
- Difficult
- Less than 15 mins
PLEASE BE ADVISED WHEN THEY SHIPPED THE BACK ORDER 1 -(taupe) LARGE CAP - RECEIVED 4 BLACK CAPS - 1-SMALL
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!
Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!
... Read more r />your advice?
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!
Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!
... Read more r />your advice?
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Grate Size
2 of 2 people
found this instruction helpful.
-
Clyde from ALLEGAN, MI
- Really Easy
- Less than 15 mins
The grates are slightly smaller then the original Kenmore parts and they slide slightly. I purchased a full set of 4 grates - part number PS244182
Was this helpful?
Thank you for voting!
No ignition
6 of 14 people
found this instruction helpful.
-
Karen from Dale City, VA
- A Bit Difficult
- 30 - 60 mins
-
Socket set
The repair was somewhat easy, it would have been easiere if I had figured out the right part in the first place! Replacing the Thermostat is a simple task and actually only took abut 10 minutes. The harder task was replacing the glow bar in the broiler area! What a pain! The part had the same gender connector as the existing wiring. Had t
... Read more
o cut the connectors off and use ceramic wire nuts... should be simple but the wires on the replacement part were about 1/2 inch too short! After some creative manuvering and about an hour of cussing out the OEM part manufacturer it went together and worked OK but I suggest before trying to solve a problem like this remember the basics... always check the obvious first!
Read less
Was this helpful?
Thank you for voting!
No problem
2 of 2 people
found this instruction helpful.
-
Laurindalva from LODI, NJ
- Really Easy
- 15 - 30 mins
-
Nutdriver
I used a nutdriver to remove the natural gas orifice and I placed the other liquid gas orifice
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
No burner
2 of 2 people
found this instruction helpful.
-
ESTELA E from HOUSTON, TX
- Very Easy
- Less than 15 mins
I just put everything on it and lighted match and problem solved! Easy fix!
Other Parts Used:
Was this helpful?
Thank you for voting!
The burner caps were chipped and discolored.
2 of 2 people
found this instruction helpful.
-
Anne from OSSINING, NY
- Very Easy
- Less than 15 mins
I merely replaced the old caps with the new ones. It couldn't have been easier!
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner had uneven flames
3 of 5 people
found this instruction helpful.
-
Akshay from Bridgeton, NJ
- Really Easy
- Less than 15 mins
Too easy a five year old could do it
Was this helpful?
Thank you for voting!
The eye would not light
2 of 2 people
found this instruction helpful.
-
Solomon A from COLLEGE PARK, GA
- Really Easy
- 30 - 60 mins
Remove the existing burner and install the replacement.
Was this helpful?
Thank you for voting!
Digital clock no longer worked
2 of 2 people
found this instruction helpful.
-
Dolores from AVOCA, IA
- A Bit Difficult
- More than 2 hours
-
Screw drivers
No longer carry the one to our stove so it was substituted with Nafisa on it. You could see all the electronics so we had to pry the old face off the old one blew it in place, but a clock was reversed from timer, but it works.
Was this helpful?
Thank you for voting!
broke tubes while cleaning under top
2 of 3 people
found this instruction helpful.
-
Sally from Bakersfield, CA
- Really Easy
- Less than 15 mins
-
Wrench set
was still using back burners while waiting for parts (after safety check). I unplugged the electric for the igniters, raised top, installed tubes, checked for leaks with soap solution, closed top, plugged in electric tested burners. Got a big hug and kiss from my wife.
Other Parts Used:
Was this helpful?
Thank you for voting!
Only A "Cosmetic" Replacement.
1 person
found this instruction helpful.
-
Jimmy from Bonifay, FL
- Really Easy
- Less than 15 mins
No job here. . . . Just sat new parts on to replace old ugly parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
The old burners were damaged by the prior owners.
1 person
found this instruction helpful.
-
Mohammad from BARTLETT, IL
- Very Easy
- Less than 15 mins
The repair was extremely easy. Just removed the old burners and dropped in the new ones. No tools needed.
Other Parts Used:
Was this helpful?
Thank you for voting!