EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

36273281892 Kenmore Range - Instructions

All Instructions for the 36273281892
1 - 15 of 64

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My old burners were beyond the point of coming clean and made my stove top look bad.
23 of 30 people found this instruction helpful.
  • Helen from Flemington, NJ
  • Easy
  • Less than 15 mins
My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.
Was this helpful?
Thank you for voting!
Oven rack missing when I purchased the house
18 of 28 people found this instruction helpful.
  • Patricia from Houston, TX
  • Really Easy
  • Less than 15 mins
I was very pleased with how quickly the new oven rack arrived and it was a perfect fit. Thanks.
Was this helpful?
Thank you for voting!
Burners were burning the pans and flames coming out at all different angles of the burner
13 of 15 people found this instruction helpful.
  • ANNE from HICKSVILLE, NY
  • Easy
  • 15 - 30 mins
The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing th e burners was easy just had to place the balancing nuts in place and put on the burners. One problem arose the hood of the stove did not go back in place after replacing the burners so I then removed the balancing nuts put back on the burners stove top hood fit back in place and burners operated properly. This part of the repair took five minutes.
Was this helpful?
Thank you for voting!
Interior light needed replaced
22 of 46 people found this instruction helpful.
  • Leo from TWIN FALLS, ID
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
Needed extra oven space
11 of 15 people found this instruction helpful.
  • noreen from flushing, NY
  • Really Easy
  • Less than 15 mins
Thanksgiving was coming and I needed extra oven space. So I ordered an additional rack. Installation ... just put it in the oven. My part came the day after I ordered it.
Was this helpful?
Thank you for voting!
Burners very old / needed to replace
9 of 9 people found this instruction helpful.
  • Debbie from Santa Clara, CA
  • Really Easy
  • Less than 15 mins
Very easy! Open the top of the stove, remove the old double burner and place the new one! Anyone can do it! It's that easy... :)
Was this helpful?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
17 of 37 people found this instruction helpful.
  • Barbara from BELLEVUE, WA
  • Very Difficult
  • Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl iance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Was this helpful?
Thank you for voting!
Oven would not hold constant temperature
7 of 9 people found this instruction helpful.
  • Michael from Boyne City, MI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
From back, top of stove, removed 4 screws from panel to gain access to control unit. Removed 4 screws holding control and let hang from wires. Removed face plate from old unit and installed on new part. Installed new control and one at a time removed wires from old part and connected to new control. Replaced cover panel. Oven works fine n ow.
Was this helpful?
Thank you for voting!
old burner not firing properly
4 of 5 people found this instruction helpful.
  • Michael from New Paltz, NY
  • Really Easy
  • Less than 15 mins
ordered parts, 2 double burners, 3 days later they arrived.opened box.
lift stove top, lift out old burner,placed next to new burner to see if they were the same. THEY WERE. place in new burner, checked to see if burner assembly fit correctly. IT DID.
units purchased were exact replacements. supplied spacer nuts not needed. ... Read more >easy fix looks new again, thanks.
Was this helpful?
Thank you for voting!
old blackened oven racks
8 of 17 people found this instruction helpful.
  • Roger from Falls Church, VA
  • Really Easy
  • Less than 15 mins
Replaced old with new.
Was this helpful?
Thank you for voting!
Burners could no longer be cleaned.
3 of 3 people found this instruction helpful.
  • Richard from San Diego, CA
  • Really Easy
  • Less than 15 mins
Lifted the top and dropped in the new burners. Realized they always should have had the leveling washers provided so I took the burners off, dropped on the leveling washers and dropped the burners back on. This all took about 2 minutes. Really made the range top look a lot nicer.
Was this helpful?
Thank you for voting!
none
3 of 3 people found this instruction helpful.
  • Michael from Laughlin, NV
  • Very Easy
  • Less than 15 mins
slid the old ones out and slid the new ones in. done
Was this helpful?
Thank you for voting!
Rusted & Dirty Burners
3 of 4 people found this instruction helpful.
  • Tara from Bronx, NY
  • Really Easy
  • Less than 15 mins
I moved to an apartment where the past tenants did not take care of the stove. I think this stove is 10+ years old and looks like it was never cleaned in all of its existance! I cleaned everything really well with oven cleaner and lots of scrubbing. The stove looked brand new except the burners! I couldn't take it anymore so I ordered n ew ones. The burners came in less time than stated. I opened the box, took the burners out, lifted the oven hood and just placed them right where the others were. There are no tools needed it pretty much just gets placed down in the appropriate spot and that's that! No directions or tools needed. My stove looks awesome now!! When you first use the burners, you will probably need to place a match or lighter by the burner to get the fire going. After that, it lights perfectly every time.
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people found this instruction helpful.
  • Gerald from WINTERVILLE, GA
  • Very Easy
  • Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
oven racks very old and writing on knobs worn ff
2 of 2 people found this instruction helpful.
  • Patricia from SAN JOSE, CA
  • Very Easy
  • Less than 15 mins
Very was ti replace racks and knobs. Very fast mail service
Was this helpful?
Thank you for voting!
All Instructions for the 36273281892
1 - 15 of 64