This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should simply screw o...Read moreut, and the new one will screw in. This part is about ¼ of a inch in diameter and is gold in color. It is sold individually and is a genuine OEM part.
This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simp...Read morely pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.
This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent cooking results. By directing airflow and preventing hot spots, it helps maintain oven efficiency and performance. Installation is straightfo...Read morerward and can typically be completed with basic tools, making it an essential replacement for restoring your range’s functionality.
This flat cooktop surface is a replacement top panel designed to provide a smooth, durable cooking area. It supports even heat distribution and is commonly replaced when cracked, chipped, or damaged.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My old burners were beyond the point of coming clean and made my stove top look bad.
23 of 30 peoplefound this instruction helpful.
Helen from Flemington, NJ
Easy
Less than 15 mins
My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.
Was this helpful?
Thank you for voting!
Pies Boiled Over And Baked On Oven Bottom
20 of 25 peoplefound this instruction helpful.
Marjorie from Yucca Valley, CA
Really Easy
Less than 15 mins
Screw drivers
Removed the two screws put the heat shield off the old one onto the new one put new bottom in and tightened two screws. Done #38. 69 Cost of part with shipping cost included.
Was this helpful?
Thank you for voting!
two of the burners were not working at all, the other two were blackening pots and pans
20 of 29 peoplefound this instruction helpful.
Callie from Bay, AR
Really Easy
15 - 30 mins
Wrench (Adjustable)
I turned off the gas flow to the appliance, removed the old oriface spuds with the adjustable wrench, inserted the new oriface spuds and tightened them with the adjustable wrench. The double burner assembly just dropped on. They fit perfectly. I did not have to use the leveling nuts that were included with the burners. The old levelers we
... Read morere still in place and set perfectly for the new burners. Very easy repair, and the range works like a new one.