3624 - Instructions

Broken part was already removed, so I used the screw from the broken support and installed the new support. Very simple, easy, and painless.

removed drawer from track replaced supports on track and one on the drawer.

The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh ... Read more t bulb in was not the problem.

Turned off the breaker to the stove. Removed the screws holding the old parts in and unplugged the element. After reshaping the element because it got damaged in shipping I plugged the wires to the new element, replaced the screws and turned the breaker back on. Tried the stove and it has worked fine since.

It would've been so much easier if replacement instructions were included. Replacement screws would've been nice also

Unscrewed 2 holding brackets. Removed old element. Unfortunately one clip broke off the wire and had to be replaced. Attached clips to element and replaced holding brackets.
Job is simple but working in the oven without damaging the oven door requires a younger back.
Without problems should take ten minutes.

First I turned OFF the elect power to the stove.
Then I got a flash light to see into the oven. removed the two screws, anf pulled the element out far enough to disconnect the two wires.
Put the connecters on the new element pushed it back put the two screws back.
Turned the power on works great, very easy.

Repair went fine as I read on how to do it and it worked fine. Hardest part was hitting the hole for the screws.

Unplugged stove. Removed door. Unfastened 2 screws at rear of oven. Removed wires from bake element. Connected new bake element. Replaced screws and door. Plugged oven back in.

I ordered the part on Sunday night and it came on Wednesday. I watched the 'Partselect' video prior to doing the repair - the video got right to the repair and it gave me all the information (and confidence) I needed. It took me longer to clean the bottom of the oven than it did to make the actual repair. I can't imagine paying someone ... Read more to do such an easy job. My kids had a great time playing with the bubble wrap from the box!

I watched the video intructing the installation of the bake element. The one thing I would suggest is to remove the oven door as this allows someone with a shorter reach to do the repair.

Removed old coil by unscrewing the element and unplugging it from the wires, adjusted the terminal slightly and plugged in the wire from the new element.

It was a very simple process and would have taken me less time if I wasn't so old and couldn't bend easily!

#1...love the website where it helped us diagnose our problem. Also the video where it showed us exactly where and what to do. #2 we accessed the rear of range and unplugged. #3 Took back panel off of range to exposed wires and clips of heating bake element. #4- removed old element from the clips to find that one end was FRIED and FRAYE ... Read more D. Like something burned through the clip. 5- We cut and stripped the end of the hot wire, re-attached the new clip to repaired wire. 6 - plugged her back in...turn the oven on to see that the NEw coil heated up wonderfully. BEST part of the story yet....I placed the order via internet on Monday at 3:45 pm. I paid for the standard shipping of $7.95 or 3-7 day delivery. On Tuesday AM....the very next day, I was WOKEN up by my doorbell at 8:05 AM....by the time I got to the door to see who it was...the FED EX truck was pulling out of my driveway. THEREFORE I got overnight delivery without paying for it. AWESOME delivery, service, transaction....and great website and parts!! HIGHLY recommend to all!!!!

Unscrewed two screws holding element in place and pulled off the electrical wires to the element.( be sure to remove power to the stove)Put wires on new element and installed screws back in. Done

Repair is really easy. Just remove two screws, pull ( gently ) on the bake element until you see the electrical connectors. Remove and do the reverse with the new part. Oven works just fine.
Really Really easy....