35HY Magic Chef Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would not heat up properly to set temperature
-
Max from Bothell, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
The element appeared to have been damaged. I replaced the element with ease. However, I still have the same problem. The oven does not heat up to the set temperature. Information from the part select website is that it is more likely the long oven sensor. I ordered one and will provide the results after I have this sensor replaced wi
... Read more
th a new one.
Read less
Was this helpful?
Thank you for voting!
Easy installation
-
Jeremie from Freeland, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Unplug stove from outlet!! Removed screws (Phillips head) from prior element and pulled out enough to slip of the red and white wires. Keep in mind which side which is on and take old element out of oven. Put new element in and attach wires back on the same sides. Push back in and use screwdriver (Phillips head) to lift insulation to push
... Read more
wires and element prongs back. Put screws back in, close oven door and plug stove back in. Tested and works great!
Read less
Was this helpful?
Thank you for voting!
The drip pans needed replacing.
-
Alison from Carnation, WA
- Really Easy
- Less than 15 mins
Put in the new drip pan -- which are really nice shiny ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Dirty drip bowls
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Just remove old bowls from range top and put new ones. That is all ... just super simple! :)
Other Parts Used:
Was this helpful?
Thank you for voting!
Dirty drip bowl
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
Light bulb failure
-
Grant from Alexandria, VA
- Really Easy
- Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
drip pan were burnt out
-
Delroy from Miramar, FL
- Really Easy
- Less than 15 mins
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowls were all rusted.
-
Robin from Seneca, SC
- Really Easy
- Less than 15 mins
Removed old rusted drip bowls and put in the new ones. Very easy to do and needed no tools. It made my 25 plus Jenn Air look new again!
Other Parts Used:
Was this helpful?
Thank you for voting!
Cooking elements had come apart and pans did not sit evenly on the burners. Only two of my four burners were usable.
-
Judith L. from Enterprise, AL
- Really Easy
- Less than 15 mins
Replaced the old elements with new ones. So easy and can now cook four things at the same time and none are tipping over!!!!
Other Parts Used:
Was this helpful?
Thank you for voting!
old drip bowl was worn out
-
Richard from Germantown, MD
- Really Easy
- Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
-
Elsie from Garner, NC
- Really Easy
- Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
To Old Needed To Be Replace
-
ROSARIO from MESQUITE, TX
- Really Easy
- Less than 15 mins
Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos
Other Parts Used:
Was this helpful?
Thank you for voting!
rusty pans
-
Stewart from Hanover, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
simply remove the old and install the new; perfit fit
Other Parts Used:
Was this helpful?
Thank you for voting!
I needed to replace my burner pans.
-
Robert from Wilton, CA
- Really Easy
- Less than 15 mins
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Other Parts Used:
Was this helpful?
Thank you for voting!
Elements did not fit properly.
-
myrna from homestead, FL
- Really Easy
- Less than 15 mins
Ordered the parts, installed.
Other Parts Used:
Was this helpful?
Thank you for voting!