35HN Magic Chef Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner was in full hot.
-
Dennis from Oak Lawn, IL
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Turned off the power. Pull the range away from the wall and removed the eight screws holding the cover in place. Carefully pulled the wires off the old switch. Removed the old switch and replaced it with the new. Put all the wires on and replaced the back cover and was done. Burner works fine. This part replaces a lot of different number
... Read more
switches.
Read less
Was this helpful?
Thank you for voting!
Oven would not heat up properly to set temperature
-
Max from Bothell, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
The element appeared to have been damaged. I replaced the element with ease. However, I still have the same problem. The oven does not heat up to the set temperature. Information from the part select website is that it is more likely the long oven sensor. I ordered one and will provide the results after I have this sensor replaced wi
... Read more
th a new one.
Read less
Was this helpful?
Thank you for voting!
Easy installation
-
Jeremie from Freeland, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Unplug stove from outlet!! Removed screws (Phillips head) from prior element and pulled out enough to slip of the red and white wires. Keep in mind which side which is on and take old element out of oven. Put new element in and attach wires back on the same sides. Push back in and use screwdriver (Phillips head) to lift insulation to push
... Read more
wires and element prongs back. Put screws back in, close oven door and plug stove back in. Tested and works great!
Read less
Was this helpful?
Thank you for voting!
The drip pans needed replacing.
-
Alison from Carnation, WA
- Really Easy
- Less than 15 mins
Put in the new drip pan -- which are really nice shiny ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Dirty drip bowls
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Just remove old bowls from range top and put new ones. That is all ... just super simple! :)
Other Parts Used:
Was this helpful?
Thank you for voting!
Dirty drip bowl
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
drip pan were burnt out
-
Delroy from Miramar, FL
- Really Easy
- Less than 15 mins
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowls were all rusted.
-
Robin from Seneca, SC
- Really Easy
- Less than 15 mins
Removed old rusted drip bowls and put in the new ones. Very easy to do and needed no tools. It made my 25 plus Jenn Air look new again!
Other Parts Used:
Was this helpful?
Thank you for voting!
Cooking elements had come apart and pans did not sit evenly on the burners. Only two of my four burners were usable.
-
Judith L. from Enterprise, AL
- Really Easy
- Less than 15 mins
Replaced the old elements with new ones. So easy and can now cook four things at the same time and none are tipping over!!!!
Other Parts Used:
Was this helpful?
Thank you for voting!
old drip bowl was worn out
-
Richard from Germantown, MD
- Really Easy
- Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
Burners quit working
-
Brenda from Brazoria, TX
- Really Easy
- Less than 15 mins
Bought two new replacement burners,they work great!
Other Parts Used:
Was this helpful?
Thank you for voting!
replacement of heating element for elec. stove
-
Erica from Ivyland borough, PA
- Really Easy
- Less than 15 mins
plugged it in to the spot where missing element was.
Was this helpful?
Thank you for voting!
Elements did not fit properly.
-
myrna from homestead, FL
- Really Easy
- Less than 15 mins
Ordered the parts, installed.
Other Parts Used:
Was this helpful?
Thank you for voting!
Somehow one of our oven racks was missing - maybe taken inadvertently from beside old refrigerator when it was removed.
-
Judy from Framingham, MA
- Really Easy
- Less than 15 mins
We just installed the new rack in the oven. The amazing thing (after many unsuccessful attempts to find the correct rack) was having a friend recommend partselect.com. The gentleman I spoke to was extremely knowledgeable, helpful and efficient. We had our new rack 2 days after placing the order. We thought that kind of service didn't
... Read more
exist any more! Thank you so much. Now we can make 2 pizzas at the same time!!!
Read less
Was this helpful?
Thank you for voting!
replace the cook stove's drip bowls instead of cleaning them
-
Dallas from Arlington, TX
- Really Easy
- Less than 15 mins
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.
Other Parts Used:
Was this helpful?
Thank you for voting!