EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3550 - Instructions

All Instructions for the 3550
91 - 105 of 1195

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken ice bucket
7 of 7 people found this instruction helpful.
  • kevin from yucaipa, CA
  • Easy
  • Less than 15 mins
  • Nutdriver
Removed Ice bucket. Removed two screws and removed front cover from old ice bucket, two more screws under cover to remove ice agitator. Installed ice agitator to new ice bucket, installed two screws holding it. Installed ice bucket front cover on new ice bucket with two screws. Put new ice bucket into freezer. Finished! That was easy!
Was this helpful?
Thank you for voting!
My ice maker stopped working and just leaked water endlessly
9 of 13 people found this instruction helpful.
  • Patricia from Sebastopol, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I ordered the ice maker, but not the wiring harness...didn't fix the problem so I ordered a wiring harness, but ordered the wrong one...so I emailed parts select and got a prompt response on how to return the mistake and which part I actually needed. It was a "special order" but got in within days. Wonderful service!
Was this helpful?
Thank you for voting!
Compressor would not start
7 of 7 people found this instruction helpful.
  • Rich from Monon, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed back access cover with quarter inch nut driver, unplugged wire harness, pulled old relay out & plugged in new one, reconnected wire harness, and reinstalled access cover. Piece of cake. (Shipping was very quick) ***Frig was only 3yr an 1 mounth old.*** Maytag - Dependable Huh?
Was this helpful?
Thank you for voting!
Power surge cause compressor to stop functioning
7 of 7 people found this instruction helpful.
  • Alvin from ORANGE PARK, FL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
Followed the YouTube video linked to the Compressor Start Device and Capacitor I purchased. The repair was just as easy as the technician in the video said it would be. Removed the back panel, remove the clamp, worked the Compressor Start Device and Capacitor off the electrical prongs and replace it with the new one. After I reassemble the refrigerator, it was fully operational. Very easy to do and only required a few tools.
Was this helpful?
Thank you for voting!
Ice maker leaked into ice reservoir
7 of 7 people found this instruction helpful.
  • joe from hilliard, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
The ice mold has a coating on it. Over time the coating deteriorates. If your ice maker leaks water into the ice reservoir inspect the mold to see if the coating is compromised. If so, replace with new.

Remove the ice maker assembly. 3 small hex screws. Unplug power cord. Disassemble ice maker assembly. Remove ice mold/h eater. Replace with new. Reassemble.
Was this helpful?
Thank you for voting!
The Freezer defrosted and everything on the top and the bottom spoiled
10 of 16 people found this instruction helpful.
  • Jorge from Miami, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver
i had used your web site before and i read several problems that your readers had. i went to the back of the unit, removed the bottom cover and right there the i found the run capacitor and i chaged it. since i had only ordered this part to save money i went back and ordered the Start Device which when i took it off it was completely burn ed. the replacement part came labeled with 2 different compressor #, so i picked the one that i had and unpluged each wire. the part may differ from the one that it's in the unit but it worked when i pluged everything back on. it also helps to take a picture of everything before removing the wires in case you have to leave it and come back later. i hope to use this refrigerator another 10 years. thank you all for your help.
Was this helpful?
Thank you for voting!
Replaced door cam closer
7 of 7 people found this instruction helpful.
  • Ronald from Cumming, GA
  • Easy
  • 15 - 30 mins
  • Nutdriver
Replaced the part--
Door snaps loudly everytime it's opened or closed.
Correct replacement part and lubed with vaseline,
Was this helpful?
Thank you for voting!
ice maker not working
7 of 7 people found this instruction helpful.
  • Ron from Bartlett, IL
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
It turned out the water valve was not the problem but I think it works a bit better with the new one. I had replaced the main part of the icemaker inside the freezer which had lost the smooth finish in the ice tray. It worked for awhile but quit.
What had happened was the large approx. 1/2 inch tube going from the back of the refrig erator to the icemaker tray became plugged with ice. It was difficult to get it out due to the ice but once I did it was easy to melt it and put it back together. All's well that ends well and avoid the cost of a repair call. Working great now.
Was this helpful?
Thank you for voting!
Mold Ice Heating Element Broken
7 of 7 people found this instruction helpful.
  • timothy from indio, CA
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Looking at the ice maker it is pretty cut & dried as to how to remove the unit. I took out the ice tray and just started removing all the mounting screws. The same for the mold ice tray & heating element. I was just sad that you did not have just the heating element separate from the mold ice tray.
Was this helpful?
Thank you for voting!
light not working in fridge
7 of 8 people found this instruction helpful.
  • Michael from East Meadow, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
It was so easy!

Thanks for the rush to my home on the part.

I just unscrewed the plate that locks in the light switch (screwdriver) and unplugged the old faulty part and plugged in the new switch, screwed the cover back on and I was done!

Easy!

And I am not Mr. Fix-it!
Was this helpful?
Thank you for voting!
Fridge missing agitator assembly and ice bucket.
7 of 8 people found this instruction helpful.
  • Ron from Deerfield, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver
While ordering the assembly, I had thought that the ice bucket was included but it wasn't. So I ordered the ice bucket afterwards. Maybe a little more clarity as far as what parts come in the whole assembly would save some time. All in all, the agitator was very easy to install, along with the ice bucket. After securing the agitator to th e existing assembly with two screws, the ice bucket slipped right into place. Easy to install.
Was this helpful?
Thank you for voting!
The Water Inlet Valve Was Leaking.
7 of 8 people found this instruction helpful.
  • ARUN from CANONSBURG, PA
  • Really Easy
  • 30 - 60 mins
  • Socket set, Wrench set
1. Unplugged the power cord 2. Took back cover off 3. Disconnected the wires to the valve 4. Disconnected the water plastic lines 5. Took the water valve out by removing (2) screws that hold it to the frame. 6. Installed the new water valve and folled the steps backwards. Working great and making a lot of ice !!!
Was this helpful?
Thank you for voting!
Broken Piece
7 of 8 people found this instruction helpful.
  • anthony from georgetown, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Had to disassemble ice maker to install part. . .
Was this helpful?
Thank you for voting!
Replaced 1 broken door cam set
6 of 6 people found this instruction helpful.
  • Gregory from Garden Grove, CA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
As the prior stories mentioned, this was a fairly easy fix to a nagging problem. Heck, we almost bought a new refer over this, cuz the door would keep popping open.

Needed a screwdriver, and a 5/16" nut driver (mounted in elec. drill). Have two people for this one! Emptying the door would help out tons too. ('course, I didn't do that!)

With the door closed, remove the plastic cover on top by removing 1 phyllips screw. Then, using drill mounted 5/16" nut driver, remove 3 hinge screws. Remove hing by lifting up. Now, carefully open and remove the door. Here is where the 2nd person comes in. There are 2-3 1/4" screws (Must use a 1/4' NUT DRIVER, SOCKET OR MAGNETIC BIT HOLDER) on the bottom of the door to remove the broken plastic cam. Also, you must remove the bad cam from the bottom hinge using I believe the 1/4" nut driver.

Finally , one person lift the door while the other kneels on the floor to help giude the door back onto the bottom hing pin. Close the door, ensuring that the top of the doors are even, and secure the 3 top hinge screws. UR done!

Greg
Was this helpful?
Thank you for voting!
ice maker dripped water into ice bin, freeezing into large block of ice,
6 of 6 people found this instruction helpful.
  • charles from PHOENIX, AZ
  • Easy
  • 30 - 60 mins
  • Nutdriver
turn off water and unplug fridge. remove ice maker bottom mounting screw. just loosen the 2 top mounting screws. unplug wire harness from back of fridge. remove old icemaker from freezer compartment. once removed, salvage square endcover and reinstall on new maker. unfasten wire harness from old maker and reinsatll on new one. reinsert th ermal wire in new ice maker holding bracket. remove second wiring bracket and reinstall on new maker to hold remaining wires (not mentioned on "how to-" video). remove old ice maker on/off bale and reinstall on new one. remount new maker to top mounting screws, reinsert harness plug into fridge. replace bottom screw,
Was this helpful?
Thank you for voting!
All Instructions for the 3550
91 - 105 of 1195