EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3545 - Parts

1 - 12 of 480

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Water Inlet Valve – Part Number: AJU75152601
$144.76
In Stock
Washer Water Inlet Valve
★★★★★
★★★★★
(77)
Part #AJU75152601
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
SENSOR ASSEMBLY – Part Number: 6501KW2002B
$58.25
In Stock
SENSOR ASSEMBLY
★★★★★
★★★★★
(25)
Part #6501KW2002B
This is a replacement sensor assembly for your washer. It may also be known as a motor rotor position sensor. The sensor assembly monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. If your washer pumps but will not spin or agitate, you may have a damaged sensor assembly. This part is sold individually, and is an OEM part sourced directly from the manufacturer. Be sure to shut off the power to your washer before you begin this repair.
Pulsator Cap – Part Number: 5006EA3009B
$49.45
In Stock
Pulsator Cap
★★★★★
★★★★★
(16)
Part #5006EA3009B
Clothing moves over a covered mounting point with help from this washer pulsator cap. The round plastic cover snaps into the center of the washplate, concealing the mounting bolt and providing a smooth surface above it. Cracks, broken retaining tabs, or a missing cap may expose the hardware or allow the cover to come loose during washing. Replacing a damaged cap restores the finished washplate surface and helps keep garments from catching around the recessed bolt opening as laundry moves through the wash cycle. This is an OEM part sourced directly from the manufacturer.
Pulsator Assembly – Part Number: AGZ72909711
$186.97
In Stock
Pulsator Assembly
★★★★★
★★★★★
(30)
Part #AGZ72909711
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. If the pulsator in your washer is broken, it will need replacing immediately to continue to wash and clean your clothes evenly. The cap that sits in the center of this part is sold separately.
Tub-to-Pump Hose – Part Number: AEM73213001
$42.12
In Stock
Tub-to-Pump Hose
★★★★★
★★★★★
(18)
Part #AEM73213001
This washer tub-to-pump drain hose carries used water from the outer tub to the drain pump during draining. Its flexible, corrugated design accommodates tub movement while keeping water contained within the drainage path. Cracks, splits, or worn sections may cause leaks beneath the washer, while a collapsed section can restrict flow and leave water in the tub. Replacing a damaged hose helps restore proper drainage and a secure connection between the tub and pump, allowing wastewater to move out during wash and rinse cycles. This is an OEM part sourced directly from the manufacturer.
Washer drain Hose Assembly – Part Number: AEM73732901
$49.45
In Stock
Washer drain Hose Assembly
★★★★★
★★★★★
(7)
Part #AEM73732901
This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pump, and it is responsible for transporting water out of the washing machine after a cycle. If the drain hose is kinked, damaged, or clogged, the washer will leak, or you may find standing water in the drum at the end of the cycle. Each drain hose comes with a metal clamp for fastening.
Screw – Part Number: FAB30598601
$32.95
In Stock
Screw
★★★★★
★★★★★
(3)
Part #FAB30598601
Secure attachment of washer components depends on fasteners that hold firmly during operation. This replacement washer screw restores an attachment where the original screw is missing, stripped, or damaged. Worn threads or a damaged head may prevent proper tightening and leave the attached component loose. Replacing faulty hardware helps restore a firm connection when the receiving threads and surrounding material remain intact. The screw can also be replaced during reassembly if damage prevents the original fastener from being tightened or removed normally. This is an OEM part sourced directly from the manufacturer.
Washer Switch Assembly sensor – Part Number: 6501EA1001R
$69.25
In Stock
Washer Switch Assembly sensor
★★★★★
★★★★★
(5)
Part #6501EA1001R
Accurate water level sensing helps the washer fill and advance through its cycles correctly. This pressure sensor assembly measures changes in air pressure through a connected tube as water enters or leaves the tub. It sends water level information to the electronic control so filling can stop at the required level. A faulty sensor may cause overfilling, underfilling, or interrupted wash cycles. Replacing a failed assembly helps restore reliable level feedback and controlled filling throughout the wash and rinse stages. This is an OEM part sourced directly from the manufacturer.
Cap,Softener – Part Number: MBL62061501
$44.22
In Stock
Cap,Softener
★★★★★
★★★★★
(3)
Part #MBL62061501
This part is the replacement fabric softener cap for your washer. It is also known as the washer dispenser drawer insert. It is made of blue plastic and is approximately 4 1/4 inches by 2 1/4 inches. The fabric softener fits inside the dispenser drawer and holds fabric softener and bleach. The main reason to replace this cap is if it is damaged or missing. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Switch – Part Number: EBF61674802
$144.76
In Stock
Switch
★★★★★
★★★★★
(5)
Part #EBF61674802
Keep the washer lid secure during operation with this lid switch and lock assembly. It detects whether the lid is closed and sends that information to the main control board. The locking mechanism holds the lid shut during high-speed spinning to help prevent accidental opening. A failed assembly may keep the washer from starting, leave the lid unable to lock, or trigger a lock warning. Replacing a faulty unit helps restore proper lid detection and locking. Unplug the washer before accessing the assembly or disconnecting its wiring. This is an OEM part sourced directly from the manufacturer.
Common Washer – Part Number: FAF30369201
$16.45
In Stock
Coupling – Part Number: MCJ61861201
$44.22
In Stock
Coupling
★★★★★
★★★★★
(1)
Part #MCJ61861201
Rotational movement passes through this washer agitator coupling as the drive system operates during washing and spinning. The coupling engages adjoining drive components to transfer motion needed for normal laundry movement. Worn teeth, cracks, or a stripped connection may prevent agitation or spinning and cause unusual mechanical noises during operation. Replacing a damaged coupling helps restore engagement within the drive mechanism and reliable movement through the wash cycle. Its shaped surfaces provide the mechanical connection that allows the connected parts to move together under load. This is an OEM part sourced directly from the manufacturer.
1 - 12 of 480