EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3523 - Instructions

All Instructions for the 3523
16 - 30 of 368

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
bake element cracked
19 of 24 people found this instruction helpful.
  • Ruth from Moyock, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Being a woman, I first cleaned the oven. Removed two screws holding the element in place. Pulled element out about 3 inches and disconnected one clip attached to a yellow wire another clip attached to a green wire. Put new element in connected clips. Replaced screws.
Was this helpful?
Thank you for voting!
Broken burner and old drip pans not able to get clean
13 of 14 people found this instruction helpful.
  • Karen from Hillsboro, IL
  • Really Easy
  • Less than 15 mins
Actually, no repair was needed. I just removed the old drip pans and my burners snap in and out, so it could not have been easier! I simply looked up the parts on your web-site, ordered and completed my transaction in about 5 minutes. The parts were delivered in two days - amazing! It could not have been easier!!!!!! I don't like to shop and this would have taken me forever to find a place that would have helped me locate parts.
Was this helpful?
Thank you for voting!
The oven would not heat properly
13 of 14 people found this instruction helpful.
  • Philip from Edgewood, KY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Pulled the oven away from the wall. Removed two screws inside the oven. Pulled old heating element out. When I did I heard a loud pop and and saw smoke. I assumed the element would not be electrically live if the oven was not on. That was obviously incorrect. I pulled the plug and then completed the installation. I went to chruch o n Sunday and thanked God that I was not electrocuted. Now the oven works fine. My wife wanted the oven to die so that she could get a new alppliance, Instead I am alive.

Seriously your service was great. Your web site pointed me to the correct part, and it arrived the next day! I would definitely use your service again if I remember your name.
Was this helpful?
Thank you for voting!
I was getting irratic temperture control. I determined that tapping on the control would cause it to turn on or off as it should, on if the frig was to warm, or off if it was to cold.
14 of 17 people found this instruction helpful.
  • Dennis from Kalamazoo, MI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The temperture control was mounted on the back wall of the refrigerator. One screw and a couple of tabs appeared to be the only attachments. After removing the screw, the freezer control appeared to be an issue since it was also attached to other parts. A little careful pushing revealed that the control knob simply snapped into the cover over the thermastat. Once unsnapped the thermastat and it's plastic cover were only attached by the three electricl connections. Pulling them loose off the terminals left the unit free. Simply examining how the old thermastat was mounted in the cover, and replacing it, and then reinstalling it in the frig was as breeze. All was well again.
Was this helpful?
Thank you for voting!
Rubber gasket failed due to age
14 of 18 people found this instruction helpful.
  • Mary from Woodland, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I learned that I could clean the window in the oven door. In taking it apart I saw that the gasket had fallen into the oven door. I found the part online, it arrived in three days. I removed the metal part of the door, removed what was left of the old gasket and put in the new one. Put the metal part of the door back on, and it was as g ood as new.
Was this helpful?
Thank you for voting!
Broken drawer glide
13 of 15 people found this instruction helpful.
  • Peter J from Valparaiso, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
As I pulled the drawer looking for a pan stored in bottom drawer the drawer glide broke. The pictures of the parts were fantastic. Not being sure of which of two parts from the photos, I ordered two parts knowing that hopefully one would be the correct one and the other would not be the part I needed. Parts arrived and it was clear whic h of the two parts would fit perfectly.

I screwed in the part, and that was it , and I was relieved that the problem was solved! I kind of feel lucky that your company is in business! The other part is fully accepted and plan to send it back in for a refund. And oh yes, I solved my appliance problem under $20.00 - unbelieveable these days!

Thank you again for beng there!
Was this helpful?
Thank you for voting!
Light in the refrigerator went out
13 of 18 people found this instruction helpful.
  • Paulette B. from Santa Ana, CA
  • Really Easy
  • 15 - 30 mins
After I bought what I thought I needed for the repair. I asked a friend to come over and look at it. He changed the
the light socket and put the same light bulb in and it works great. I am returning the light switch but decided to keep the light bulb.

Getting on the internet was so easy. This was really very simple. Thank you for making what I thought would be a big ordeal into something very simple.

Paulette Johnson
Was this helpful?
Thank you for voting!
Burner was out but the burner coil worked on onother burner
10 of 10 people found this instruction helpful.
  • Richard from Orange, CA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select.
Was this helpful?
Thank you for voting!
Door Seal on oven was old, hard and breaking apart.
10 of 11 people found this instruction helpful.
  • Kenneth from Friend, NE
  • Really Easy
  • Less than 15 mins
  • Pliers
It was very simple, pull off the old one, then I took some pliers and pulled out the fasteners. Took new gasket from bag and it just snapped into place.
Was this helpful?
Thank you for voting!
The oven stopped heating
10 of 11 people found this instruction helpful.
  • GENE from TRENTON, SC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I swiched off the circuit breaker just to be safe.Then I removed the two mounting screws and disconnected the the element leads. Very easy task, approx 5 mins. THANKS
Was this helpful?
Thank you for voting!
Fridge keeps cycling on and off and a clicking sound happens every time compressor cycles.
10 of 11 people found this instruction helpful.
  • Kirk E from GRASS VALLEY, CA
  • Easy
  • Less than 15 mins
  • Screw drivers
I opened the back panel of the fridge and exposed the compressor. Unplugged existing run capacitor and installed new one with the addition of the sleeve that is stated must be installed around the run capacitor.
Everything I read and on this web site says that based on these symptoms, that the problem is the run capacitor. I search ed and search for a part called a start relay which plugs in to the compressor. This run capacitor plugs in to this other part which I take as the start relay.

Installing this run capacitor did not solve the problem. The fridge compressor keeps cycling on and off. Freezer doesn't keep as cold as it should.
Was this helpful?
Thank you for voting!
Burner heat does not turn down
9 of 9 people found this instruction helpful.
  • Gary from Blanchester, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Turn off breaker.
Remove knob, pulls off. Pulled stove away from wall.
Removed front panel with switches attached.
There are screws in front and back.
Removed screws that hold switch in place.
Transferred wires one at at time to get proper location.
Reverse process for reassembly
Gary in Ohio
Was this helpful?
Thank you for voting!
oven heating/bake element cracked
9 of 10 people found this instruction helpful.
  • Carol from Brunswick, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First-my daughter needed her pizza and I didn't want to even think about the cost of a new range. So she did some research online about replacement parts. Lo an behold, Partselect.com was our answer.

We received the part in a few days and replaced it with just unscrewing a few screws.. AFTER we unplugged the range. We also used a tool that I would describe as a nail remover/lifter to get the end off of the wire connection. Needless to say, we were rookies and had no experience with this type of repair and were so proud that we were able to spend less than $30.00 to fix our oven.
Thanks to Partselect.com for making it easy to do this repair on our own.
Was this helpful?
Thank you for voting!
burner receptacle burned out
8 of 9 people found this instruction helpful.
  • Michael from N. Haverhill, NH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Worst part of the job was removing the old screws that held the two old rectecles in place for the two burners I repaired. Once the screws were removed cut the wires stripped them and used the porceliean wire nuts provided with the kit. Easy job and good instructions.
Was this helpful?
Thank you for voting!
The oven wouldn't heat
8 of 9 people found this instruction helpful.
  • Richard from Wilmington, MA
  • Really Easy
  • Less than 15 mins
  • Pliers
First I shut off the power at the circuit breaker.Then I removed the racks to make room to work.I then removed the 2 screws holding the element in place and pulled both sides out approx.3 inches.After carefully disconnecting the wires,I put the new element in to place and repeated the steps backwards.
Was this helpful?
Thank you for voting!
All Instructions for the 3523
16 - 30 of 368