34510-2 General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light would not stay on
-
Kenneth from Leavenworth, KS
- Easy
- Less than 15 mins
First I flipped breaker to off position for refigerator, Pulled down on socket and broke it free. Then took needle nose piars to pull wire and plug out from hole, so I could conect to new light socket then snaped it in place . Hardest part was getting wire and plug out of hole.
Was this helpful?
Thank you for voting!
needed new light socket
-
Charles from Williamsburg, VA
- Really Easy
- Less than 15 mins
Pulled out old socket.pushed in new one.
Was this helpful?
Thank you for voting!
Noisy fan
-
Robert L. from Eldred, PA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple
Was this helpful?
Thank you for voting!
Buildup of ice on coil -timer not working
-
joseph from wall, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed floor grate,romoved screw holding timer,push timer back,removed hex-screw holding bracket,removed ground wire.Removed connectors from old timer and put on new timer,pushed back new timer,mounted bracket,screwed new timer to bracket. Set timer to defrost at 11pm,put back floor grate.
Was this helpful?
Thank you for voting!