EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3442 - Instructions

All Instructions for the 3442
121 - 135 of 323

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
One of the broiler drawer support broke
1 of 2 people found this instruction helpful.
  • Jay from Charleston, SC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Piece of cake. Removed the Phillips screw with screwdriver, placed new one on the slide and used old screw to screw it in place. Drawer does not lean to one side anymore.
Was this helpful?
Thank you for voting!
Needed to replace two stove valve knobs.
1 of 2 people found this instruction helpful.
  • Roberta from BROOKLYN, NY
  • Really Easy
  • Less than 15 mins
Inserting two stove valve knobs took 10 seconds! No tools necessary.
Was this helpful?
Thank you for voting!
Drip pans were rusted. I had shopped for replacements at local appliance stores without finding them.
1 of 2 people found this instruction helpful.
  • Norma J from Philadelphia, PA
  • Really Easy
  • Less than 15 mins
Removed the rusted drip pans and replaced them with the new pans. Range looks great and ready for many more years of use!
Was this helpful?
Thank you for voting!
Oven ignitor would glow but took 30 - 40 mins to heat
1 of 2 people found this instruction helpful.
  • Catherine from Newton, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
It took me 10 mins to replace the oven igniter and I did it myself. Oven is working fine now. I saved myself a $300.00 repair bill. Thank you for making the part available and saving me dollars!
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
oven door seal
1 of 2 people found this instruction helpful.
  • David from Jacksonville, FL
  • Really Easy
  • Less than 15 mins
easily pulled old seal out and push new seal in place simple and quick.
Was this helpful?
Thank you for voting!
Igniter Would Glow But Stove Wouldn't Light
1 of 2 people found this instruction helpful.
  • ALAN from LUCK, WI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I noticed that the ignitor would glow but the stove wouldn't light - I got the model number of the stove and googled the maytag model number. Came upon your website and realized that 94% of the time the problem was the amps were not enough to light the stove. I looked at all of the stories on how easy it was to fix. I ordered the pa rt and received it within 3 days. I opened the door part way and lifted it straight up to remove it. I pulled out the bottom broiler plate by grabbing the back on pulling up. I undscrewed the wing nut of the flame bar and had easy access to the igniter. I removed the two nuts from the old igniter. Unplugged the igniter from the easy access door from the back and plugged in the new igniter. Replaced the access door and attached the igniter with the two nuts. Put the flame bar back on, put the broiler plate back on, put the door back on, plugged in the stove turned it on and success. It was so easy. I know in our area I would have paid near $200 for a service technician to come out and do what I did in approx. 20 Minutes and $50 for the part. Thank you so much for you website to help us not so talented appliance repair homeowners.
Was this helpful?
Thank you for voting!
Oven did not ignite
1 of 2 people found this instruction helpful.
  • John from Racine, WI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove the door... it just pulls up and out... set the release tabs so you can remove the bottom plate .. pull out broiler drawer... unscrew the 2 screws on the igniter ..let that hang... remove the cover for the termination.. and unplug the old igniter... then reverse everything to put back together..
Was this helpful?
Thank you for voting!
Oven Ignitor went to ignitor heaven.
1 of 2 people found this instruction helpful.
  • Brian from Pittsburgh, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Socket set
The repair was real easy, other than the old bolts which just turned in the sockets when trying to get them out. It might be a good idea to provide two nuts and bolts to negate this problem. I would not mind paying a dollar or two extra for two bolts and nuts. Other than that, the instructions were clear. Product arrived on time and I wou ld absolutely use your services again. Oven is back to working great! Thank you!
Was this helpful?
Thank you for voting!
Old and corroded drip pans
1 of 2 people found this instruction helpful.
  • Veronica from Miami Beach, FL
  • Really Easy
  • Less than 15 mins
Furtunately, it was just a replacement of the drip pans. It changed the entite looks of my range for under $ 25.00 dollars. Very satisfied!
Was this helpful?
Thank you for voting!
Oven Wouldn't Light. Smell Of Gas Before Lighting
1 of 2 people found this instruction helpful.
  • Charles from Alexandria, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
First I went online to find out about the availability of the part. In my search, I found what others had experienced and how they repaired it. Second, I ordered the part and followed others stories on their repair efforts. Third, I unplugged the range and removed the racks. Fourth, I removed the bottom of the oven which lifts out bac k first. Fifth, I removed the wing nut securing the flame difusser making it easier to access the element. Sixth, I had read that others had problems saving the original screws and/or threaded holes. I sprayed some wd-40 on both screws. They came out and back in without a hitch. Seventh, I removed and replaced the element, snap out, snap in. Eighth, I turned on the oven. It took about 15 seconds to glow but wow, it lit 5 seconds after that. I am my wife's hero!
Was this helpful?
Thank you for voting!
I'd damaged the old door seal
1 of 3 people found this instruction helpful.
  • kerry from oldsmar, FL
  • Really Easy
  • Less than 15 mins
Once I saw the spring clips on the new door seal, it was easy to understadn how to remove the old seal and install the new one. Looks nice !
Was this helpful?
Thank you for voting!
missing clock knob
1 of 3 people found this instruction helpful.
  • Jimmie from Hampton, VA
  • Really Easy
  • Less than 15 mins
placed knob on clock shaft with my fingers
Was this helpful?
Thank you for voting!
The floor panel of the oven was pocked and in bad shape
2 of 6 people found this instruction helpful.
  • Roger from San Juan Capistrano, CA
  • Really Easy
  • Less than 15 mins
I found the panel on the innernet, ordered it and when it arrived I removed the old one and replaced it with the new one.
Was this helpful?
Thank you for voting!
The broiler drawer support broke while removing the drawer for cleaning. Order part through Part-Select, arrived within 4 days, replaced broken part same day.
1 of 3 people found this instruction helpful.
  • Stanley from Brunswick, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Broken part was already removed, so I used the screw from the broken support and installed the new support. Very simple, easy, and painless.
Was this helpful?
Thank you for voting!
All Instructions for the 3442
121 - 135 of 323