EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

335X Husqvarna Chainsaw - Parts

13 - 24 of 205

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Trimmer Check Valve – Part Number: 530026119
$7.65
In Stock
Trimmer Check Valve
Part #530026119
This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it will be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.
Chainsaw Starter Rope – Part Number: 505305125
$12.05
In Stock
Chainsaw Starter Rope
Part #505305125
Primarily used in chainsaws, this Starter Rope is an exact replacement part for hundreds of models. It is white and sold individually, not as part of a kit or assembly. The Starter Rope will need to be replaced once you notice signs of it fraying, wearing, or it breaks off. Customers rate this repair as Easy.
Flange Nut – Part Number: 503220001
$6.55
In Stock
Flange Nut
Part #503220001
This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 thread and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.
Diaphragm – Part Number: 503896701
$66.93
In Stock
Diaphragm
Part #503896701
This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.
Recoil Spring – Part Number: 501763101
$20.85
In Stock
Recoil Spring
Part #501763101
This item has been sourced from the original manufacturer to be used with chainsaws and brushcutters from Husqvarna and Jonsered. The metal recoil spring is part of the starter assembly and is used to pull the starter rope back after it is pulled to start the motor. This spring is priced as a single item.
Chainsaw Screw – Part Number: 503200216
$6.72
In Stock
Chainsaw Screw
Part #503200216
This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.
Diaphragm Pump – Part Number: 504130807
$46.15
In Stock
Diaphragm Pump
Part #504130807
This fuel pump diaphragm, also called a membrane or a gasket, is what helps pump fuel from the tank to the engine of your gas-powered lawn equipment. It is normally found attached to the carburetor assembly itself. You can tell that the diaphragm is broken when your engine is not starting properly, lacks power, or frequently stalls. You may also notice that your machine is leaking fuel or smells strongly of gasoline. A broken diaphragm could lead to engine performance problems, and it may eventually stop working altogether. When replacing your old diaphragm, you will need a wrench to disconnect it from the fuel pump housing. Kindly note that this OEM-sourced component is sold individually.
Starter Pulley – Part Number: 537201901
$35.15
In Stock
Starter Pulley
Part #537201901
This is a genuine Poulan, Husqvarna and Jonsered part for use with Chainsaws.The Recoil starter pulley spins the flywheel to start the engine. This part is sold individually. The most common reason for replacing the starter pulley is when it is broken or stuck, causing the rope to not rewind and the engine to not start. The tools that you will need to replace the starter pulley are a Torx head screwdriver and needle-nose pliers.
Spark Plug Conn. Kit – Part Number: 501485402
$20.18
In Stock
Spark Plug Conn. Kit
Part #501485402
This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. The coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.
Fuel Hose – Part Number: 591375201
$7.65
In Stock
Fuel Hose
Part #591375201
This is an Authentic OEM sourced replacement part designed for use with Husqvarna Chainsaws. This is the Hose that delivers fuel from the Tank to the Engine. It is made out of Rubber and it is Sold Individually. Please note Fuel Filter is Sold Separately.
Screw – Part Number: 503217550
$6.95
Special Order
Screw
Part #503217550
The screw attaches to the filter holder. This part is available individually and is made of metal. It is a genuine replacement part sourced from the original manufacturer for use with blowers, edgers, saws, and trimmers made by Husqvarna. When replacing this item an allen wrench will be required during the installation process. It will require replacing if it becomes stripped or broken.
Chainsaw Chain Catcher – Part Number: 501686801
$7.65
Special Order
Chainsaw Chain Catcher
Part #501686801
This is an authentic OEM part. The Husqvarna chain catcher is compatible with many chainsaws. The metal component is a safety feature, providing protection from a damaged or broken chain. The chain catcher is fastened to the crankcase assembly. Please note the screw used to secure it is sold separately. The chain catcher is sold individually. A hex key is often required for the installation.
13 - 24 of 205