Models > 326L

326L Husqvarna - Overview

Models starting with 326L

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Bearing – Part Number: 532009040
Bearing
★★★★★
★★★★★
(3)
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.21
  In Stock
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
(1)
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.99
  In Stock
Air Filter (Ready-Oiled) – Part Number: 537186301
Air Filter (Ready-Oiled)
PartSelect #: PS9020811
Manufacturer #: 537186301
This ready-oiled air filter is an OEM part that traps dirt and debris, preventing them from entering the engine. This part is black, comprised of foam, and is sold individually. Your air filter may be...
$7.46
  In Stock
Chainsaw Primer Bulb – Part Number: 503936601
Chainsaw Primer Bulb
PartSelect #: PS9282918
Manufacturer #: 503936601
This is an air purge for various lawn and garden equipment. The air purge may also be known as the primer bulb, and it is made for small engines. This part circulates fuel into the carburetor of your ...
$13.69
  In Stock
Hose – Part Number: 537042401
Hose
PartSelect #: PS9020992
Manufacturer #: 537042401
This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor...
$5.29
  In Stock
Knob – Part Number: 502204001
Knob
PartSelect #: PS8993624
Manufacturer #: 502204001
The air cleaner knob, just over 1 inch in diameter, is black in color and made of plastic. It is sold individually, and its function is to tighten the air cleaner cover down on various lawn and garden...
$6.21
  In Stock
Screw – Part Number: 502206503
Screw
PartSelect #: PS8985566
Manufacturer #: 502206503
$3.99
  In Stock
Fuel Tank Bushing – Part Number: 580457501
Fuel Tank Bushing
PartSelect #: PS11824288
Manufacturer #: 580457501
Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a ...
$7.46
  In Stock
Air Filter – Part Number: 537143101
Air Filter
PartSelect #: PS9022665
Manufacturer #: 537143101
This air filter comes in black foam and is rated as "Easy" to install. Installation requires a screwdriver, and the part attaches inside of the air cleaner housing. This manufacturer certified filter ...
$7.46
  In Stock
Fuel Filter – Part Number: 503443201
Fuel Filter
PartSelect #: PS9282679
Manufacturer #: 503443201
  No Longer Available
Fuel Tank Bushing – Part Number: 503735801
Fuel Tank Bushing
PartSelect #: PS8990930
Manufacturer #: 503735801
$7.53
  On Order
Starter Pawl Bridge – Part Number: 503873305
Starter Pawl Bridge
★★★★★
★★★★★
(2)
PartSelect #: PS9282878
Manufacturer #: 503873305
The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue,...
$27.40
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Would not start now runs great
Remove and replace
Parts Used:
Carburetor
  • JAMES from FAYETTEVILLE, AR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing ran like a champion again.
Parts Used:
Plate
  • Jeremy from DILLSBURG, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Weed eater flooded constantly.
Very simple repair...took the old carburetor off and installed the new one. After replacement, the weed eater fired up after the second pull. Cover, removed 4 bolts. Carburetor, three bolts. Removed two hoses, choke handle and installed. Order gasket...never hurts to replace gaskets. One other thing, most important...use premix fuel!!! I use it in all gas powered equipment now. Cleaner and does not gum up filters and carburetor.
Parts Used:
Carburetor Gasket
  • Richard from CHINA GROVE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!