322L Husqvarna - Overview
Models starting with 322L
Click on the best match to narrow your results.
- 322L (322 L 2000-04) Husqvarna Trimmer (Line Trimmer)
- 322L (322 L 2000-01) Husqvarna Trimmer (Line Trimmer)
- 322L (1999-03) Husqvarna Trimmer (Line Trimmer)
- 322L Husqvarna Trimmer (322 L)
- 322L ( 20020100001-20150100000 2002 ) Husqvarna Trimmer (322 L, 20020100001-20150100000)
- 322L (2001-01) Husqvarna Trimmer (322 L (2001-01))
- 322L (20000100001-20020100000) Husqvarna Edger (322 L (20000100001-20020100000))
- 322L (20020100001-20150100000) Husqvarna Edger (322 L (20020100001-20150100000))
- 322L (2002-01) Husqvarna Trimmer (322 L (2002-01))
- 322L (19991000001-20000100000) Husqvarna Edger (322 L (19991000001-20000100000))
- 322L (2000-10) Husqvarna Trimmer (322 L (2000-10))
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Flange Wheel Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$11.85
In Stock
Lawn Mower Ring Clip
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$6.72
In Stock
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$6.72
In Stock
Lawn Mower Washer
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$6.72
In Stock
Cap Axle Black 1 50 x 1 00
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$6.72
In Stock
Lawn Mower High Lift Blade
PartSelect #: PS9286056
Manufacturer #: 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
$26.68
In Stock
Chainsaw Primer Bulb
PartSelect #: PS9282918
Manufacturer #: 503936601
Genuine Husqvarna replacement part, this part is sold individually. The 503939601 Air Purge does just what the part name says. It purges the air out of the carburetor. Then it forces fuel from the fue...
$12.81
In Stock
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
$13.44
In Stock
Trimmer Oiled Air Filter
PartSelect #: PS9020811
Manufacturer #: 537186301
This ready-oiled air filter is an OEM part that traps dirt and debris, preventing them from entering the engine. This part is black, comprised of foam, and is sold individually. Your air filter may be...
$8.01
In Stock
Trimmer Hose
PartSelect #: PS9020992
Manufacturer #: 537042401
This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor...
$6.72
In Stock
Lawn Mower Hardened Washer
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$6.72
In Stock
Common Symptoms of models starting with 322L
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Parts Used:
-
Anthony from OLIVEHILL, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
27 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it function
... Read more
s properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Read less
Parts Used:
-
Lynn from BOILING SPGS, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
20 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more r, ..... and you know the rest.
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more r, ..... and you know the rest.
Read less
Parts Used:
-
Trace from LISLE, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
17 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!