EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

32-1014 Tappan Range - Instructions

All Instructions for the 32-1014
121 - 135 of 227

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
There was a glow in the oven but the oven wouldn't heat up
0 of 1 people found this instruction helpful.
  • sean from spring grove, IL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First I removed the two screws that held the element in place. I then pulled the element out about 3 inches and disconected the two wires. Take the old element out, and attach the new one. Assemble in reverse order.
Was this helpful?
Thank you for voting!
oven wouldn't light
0 of 1 people found this instruction helpful.
  • matthew from Plainfield, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I made sure I memorized just how the wires would re-connect with the wirenuts. I then re-assembled everything. Be sure to read all the instructions, especially how to properly install wirenuts. I was able to access the wire connections below the oven chamber through the drawer at the bottom of the range. This is an important detail.
Was this helpful?
Thank you for voting!
oven taking long time to start and shutting down while baking
0 of 1 people found this instruction helpful.
  • Merle from Monticello, IN
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The oven igniter was working, the Sears repairman said by the phone the igniter was probley weak and not geting hot enough. Remove door ( 4 screws) Remove oven pan (4 Screws) remove burner sheld. remove lighter and cut wires. Install new. Remove storage drawer and splice new wires to the old at the back.
Was this helpful?
Thank you for voting!
bad oven ignitor
0 of 1 people found this instruction helpful.
  • Janice from Mountain Home, AR
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
A friend replaced the new ignitor with the old one...very simple job.

I would like to comment on how fast the service was from when I ordered the part online to 3 business days later when the part arrived....very happy about how easy it was to order part and that the part was in stock and delivered so quickly. Thank you very m uch !! I will recommend Part Select to a friend that frequently orders parts.
Was this helpful?
Thank you for voting!
Oven would not ignite to heat to baking temperature
0 of 1 people found this instruction helpful.
  • Louise from Delaware, OH
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
pulled stove out to unplug the electric cord. Took oven door off and removed the bottom panel (2 screws) and then removed the burner (2 screws). took off old igniter ( 2 nut screws). cut wires and stripped the coating to wire to new unit.
Attached new igniter to the burner, and put the burner back in place and replaced the screws so unit was stable.
Turned oven on to make sure ingiter was going to light oven, when oven came on, turned oven off and replaced the cover to the burner and the bottom panel in the oven,. Put the oven door back on........
Probably took 45 minutes.
I ordered the part late Friday afternoon, around 3, and the part was here Saturday Afternoon. I was impressed.
Was this helpful?
Thank you for voting!
The oven igniter no longer worked
0 of 1 people found this instruction helpful.
  • Ralph from East Brunswick, NJ
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
Let me begin to say your service was great. I received the unit the next day. Also your price was good.
The whole job took me an hour. I would have done it sooner but I didnt a square head driver bit to remove the igniter from the burner assembly. I removed the whole assembly and with a pliers slowly unscrewed the mounting screws. Af ter that I disconnected the igniter per your instructions,spliced the remaining wires reconnected the gas and electric and I was good to go.
Was this helpful?
Thank you for voting!
Replace the oven igniter
0 of 1 people found this instruction helpful.
  • Mike from Hamburg, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Remove the oven drip pan & burner baffle. unscrew & cut leads to remove old igniter. Splice old leads to new using furnished wire nuts and remount. Job would have been easier with oven door removed, but didnt want to create a new project.
Was this helpful?
Thank you for voting!
Oven Burner Would Not Ignite. Heard the controls click to start oven but no fire.
0 of 1 people found this instruction helpful.
  • Mark from Rockford, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplug appliance. Remove the bottom of the oven (2 screws in back of oven bottom), remove burner cover (2 screws in front and nut in center holding burner). Pull out the bottom storage drawer under the oven and unplug both wires from oven Igniter which are located in the back. One wire plugs into the gas valve and the second wire went into a connector that was on the lower left. I removed the screw on the back oven wall that held the burner so I could remove the burner for ease of work. Remove two screws holding the old igniter. The two screws holding the igniter to the side of the burner were stripped and they took a little time to remove but I replaced them with two new screws I had in my misc. screw drawer and had no issue. Cut the top wire and splice it onto the top wire of the new igniter using the porcelain wire nuts provided. Do the same with the bottom wire. Re-assemble and plug back in. Everything worked perfectly.
Was this helpful?
Thank you for voting!
The igniter would glow but the gas would not come on.
0 of 1 people found this instruction helpful.
  • ernest from mays landing, NJ
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I removed the oven bottom which was held by two large head long screws. I then removed the heat deflector using a small socket. The only difficult part was when I went to replace the igniter. The screws that were holding it in place stripped I guess do to the amount of heat they were continually subject too. I had to apply pressure to the igniter bracket while removing the screw using a small socket. Even with that they did not come out easily. If I had not had trouble removing the screws the repair probably would have taken 15 min.
Was this helpful?
Thank you for voting!
Bake unit did not ignite
0 of 1 people found this instruction helpful.
  • Joseph from Warminster, PA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Followed service sheet. Measured 2.6 amps draw at igniter wire which should have been 3.2 amps. Replaced igniter and problem resolved.
Was this helpful?
Thank you for voting!
Oven not igniting
0 of 1 people found this instruction helpful.
  • Kirk from Saint Paul, MN
  • Easy
  • 15 - 30 mins
  • Wrench set
Unplug electric , remove old igniter, cut wires, shorten new igniter wires, strip insulation, wire nut together, attach new igniter, plug in electric, fire it up. Worked great.
Was this helpful?
Thank you for voting!
Oven would not heat up
0 of 1 people found this instruction helpful.
  • Steve from Canton, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Checked voltage supply to oven igniter, had 120 v
to oven igniter, but igniter was not glowing.
Was this helpful?
Thank you for voting!
Oven wouldn't heat, made noises
0 of 1 people found this instruction helpful.
  • Marvin from Woodbridge, CT
  • Easy
  • 15 - 30 mins
  • Nutdriver
First I'll say the instructions and comments from this site were right on, making it easy. I slid the oven out and unplugged the electric. Opened the door, took out the racks, took out the two thumbscrews at the back bottom and lifted the bottom plate up and out, and lifted off the heat guard plate. I could then see and reach the ignite r pretty easily (the flashlight helped). The igniter may have been replaced before because there were already wire nuts on the wires. I unscrewed the two screws using the nutdriver and noted which wire (top or bottom) went to which wire inside. Unscrewed the wire nuts and removed the old igniter. Used the old igniter to determine where to cut and strip the new igniter's wires. Connected the wires of the new igniter using the wire nuts and put the two mounting screws in. Then just put all the other stuff back in (heat guard, bottom plate/two thumbscrews, racks). Plugged it in and started the oven. Got a small amount of "crackly" noise initially (maybe because the igniter was new) but that went away and it's been working fine and quiet since. Very easy (well, perhaps other than being on your knees, leaned into the back of an oven for a couple minutes). Well worth the effort.
Was this helpful?
Thank you for voting!
Oven not heating and theres a smell of gas.
0 of 1 people found this instruction helpful.
  • Ken from Fresno, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
1. Unplugged unit and shut gas off.
2. Removed the oven door(2screws).
3. Removed the oven floor(3screws).
4. Removed heat dispersion plate(1bolt).
5. Removed faulty igniter(2screws).
6. Labeled and spliced wires.
7. Connected new igniter.
8. Installed all previously removed parts.
9. Restored power and gas to unit and oven
fired up in a matter of seconds.....Thanks
Was this helpful?
Thank you for voting!
oven would not light
0 of 1 people found this instruction helpful.
  • Gerald from Scotia, NY
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
suspected oven ignitor,went to partselect website and saw
others had same concern and ignitor was the failed part.ignitor was not getting white hot just orange-not enough
voltage going to the gas valve to open it.ordered and replaced
ignitor.repair took about 20 minuets-oven repaired.
Was this helpful?
Thank you for voting!
All Instructions for the 32-1014
121 - 135 of 227