EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31HA Magic Chef Range - Instructions

All Instructions for the 31HA
16 - 30 of 303

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb burned out
12 of 12 people found this instruction helpful.
  • Jeffrey from Marietta, GA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the two screws that hold the back glass in place. Rotated old bulb out of it's lamp fixture and replaced it with the new bulb. Replaced glass and reinstalled the screws.
The hardest part was finding the bulb ... a very unique 18W flourescent. I wasted a couple of hours trying to locate it locally at my regular suppliers. Th e order at PatsSelect was easy and direct and the bulb was on my doorstep 3 days later .. an exact fit. Thanks guys.
Was this helpful?
Thank you for voting!
Rubber gasket failed due to age
14 of 18 people found this instruction helpful.
  • Mary from Woodland, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I learned that I could clean the window in the oven door. In taking it apart I saw that the gasket had fallen into the oven door. I found the part online, it arrived in three days. I removed the metal part of the door, removed what was left of the old gasket and put in the new one. Put the metal part of the door back on, and it was as g ood as new.
Was this helpful?
Thank you for voting!
spring broke on one side of door hinge
14 of 20 people found this instruction helpful.
  • Travis from Lexington, OK
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Pulled the stove out, removed the sides and attatched the new springs( replaced both while the stove was out). Worked like new and put the stove back.
Was this helpful?
Thank you for voting!
leak
12 of 14 people found this instruction helpful.
  • George from Plainville, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed then installed new unit by hand. received order the next day-am. delivery time great.
Was this helpful?
Thank you for voting!
oven won't stay light
10 of 10 people found this instruction helpful.
  • Shannon from Lake Park, IA
  • Easy
  • 15 - 30 mins
  • Screw drivers
removed racks, bottom plate. removed screws with a little bit of help from cooking spray. Unclipped old ignitor clipped in new ignitor, used old screws, and inserted insulation replaced racks, bottom shelf. Turn on oven and worked, been using it for about a week now. PS. ordered on monday morning arrived wednesday afternoon.
Was this helpful?
Thank you for voting!
gas burners and gas oven would not light
14 of 22 people found this instruction helpful.
  • nicholas from livermore, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
unplug the oven and pull it away from the wall. looking at the oven from the back, the spark module is at the bottom on the lower left. there is a two piece sheetmetal cover over the area of the spark module. use a phillips head screwdriver to remove five screws and the covers come off. the spark module is the blue cube with four push on wire connectors. all you have to do is hold the new one next to the old one and swap one wire at a time. both were clearly marked with identical numbers and letters. really nothing to it. it took me longer to clean the back of the oven than to replace the module. the old module was eaton part number Y-54052-3. the new one is eaton part number Y-054052-34.
Was this helpful?
Thank you for voting!
Oven would not lite
11 of 14 people found this instruction helpful.
  • Timothy from Petaluma, CA
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
With a little adjustment to the mount the part went in ok. Checked the oven works like new; well better than new.
Was this helpful?
Thank you for voting!
Oven wouldn't ignite
8 of 8 people found this instruction helpful.
  • Treasure from High Point, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I unpuged the Range. Then I removed all racks and bottom tray of oven.
The Ignitor is located at back of oven, paralelle to the gas bar. I removed the 2 screws holding the ignitor and unpluged the wires. Then I put on the new ignitor, perfect fit, replaced the 2 screws and pluged in the wires , then pluged in the range. I tur ned the oven on and it lit in about 10 seconds.
Thank you PartSelect for having such a wide range of range & oven parts . no one should have to pay a service tech. to fix most problems, as long as we have a GREAT SITE LIKE THIS ONE.
p.s. You guy also had one of the lowest prices , my part arrived ahead of schedule .
THANKS A LOT !
Was this helpful?
Thank you for voting!
Purchased home but stove had no broiler pan.
16 of 33 people found this instruction helpful.
  • Raymond from BLOOMINGTON, MN
  • Very Easy
  • Less than 15 mins
Purchased 2 piece broiler pan from this site
Was this helpful?
Thank you for voting!
the burner knobs broke off
10 of 17 people found this instruction helpful.
  • Belinda from Downey, CA
  • Really Easy
  • Less than 15 mins
I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....
Was this helpful?
Thank you for voting!
Oven wouldn't ignite
8 of 11 people found this instruction helpful.
  • John from Caliente, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Removed oven door (easy it lifted right off) and remove oven bottom (also easy, no tools). removed two screws holding igniter and unplug old igniter from power. Re-attached new igniter and re-assembled oven.

Parts came very quickly from PartSelect. Good service.
Was this helpful?
Thank you for voting!
The range burners would not catch a spark and ignite. They would just keep clicking with no ignition.
8 of 11 people found this instruction helpful.
  • Adrienne from Lake Havasu City, AZ
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I had an appliance repair rep do the replacement. He made it look relatively easy.
The repair man first turned off the breaker to the range and confirmed there was no power to the range.
After lifting off the range top cover exposing the burner igniters, he unhooked and removed the igniters. He opened the lower oven door exp osing the screws which hold the front knob plate in position. He took those out. After loosening the knob plate he was able to unscrew and raise the inside cover which exposes the wires and the spark module.
My spark module was located in the front left corner area tucked a little under the knob plate. That is another reason why he had to loosen the plate. The replacement part was a universal part so he had to do a little work on the wire connectors but it only took a couple of minutes. Once he configured the wire ends, he was able to plug in the new spark module and put the top back together again.
The repair man knew exactly what to do and made it look relatively easy. I did not want to tackle this problem because I did not know exactly where the spark module was since some models have them in the back of the oven and the oven has to come out from the wall. Also, the wire connections had to be worked with a little and he knew exactly how to do that.
The repair man took about 45 minutes from beginning to end with most of that time spent getting to the part and putting it back together. The replacement itself took only about 10 minutes.
Was this helpful?
Thank you for voting!
Door Spring Broke
7 of 9 people found this instruction helpful.
  • Thomas from Van Nuys, CA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed 7 screws on sides and one on top of stove. Replaced both springs (only one was broken but did both). Took around 15 to 30 minutes from start to finish.Fastest shipping in history during holidays without paying anything extra.
Was this helpful?
Thank you for voting!
Igniters were flaky on 2 burners and almost dead on 2
7 of 10 people found this instruction helpful.
  • Matt from Craig, CO
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
The part didn't come with installation instructions specific to any stove/oven so I went by a previous testimony on this website and pulled out the stove, and started to remove the side panel to get access. Well turns out I could have done the whole repair in place because on my Maytag the igniter source is accessible by removing the uti lity drawer and it's mounted on a small galvanized steel panel at the left side which hides the part directly. The existing spade connectors were the right size for me but I did have to crimp them tighter (which was perhaps part of the initial problem). After installation, the spark is much more powerful and all burners lit first couple "clicks".
Was this helpful?
Thank you for voting!
spark ignition in stove failed to turn on burnes.
7 of 10 people found this instruction helpful.
  • David from Upland, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Remove burnes and top oven glass, , identified cables for each burner. Unpluged cables, remove old ignition module, drill a hole to install new module. Place module in location. I had to figure out what cables were for the right burner as after placing in the same location as old ignition Module it turned out that they were not identical. I did have to cut old plugs to be able to install cables to new ignition module. If the new part came with and adapter to old cables, as old plugs have small connectors, the new one comes with larger plugs. That would have made it esier.
Was this helpful?
Thank you for voting!
All Instructions for the 31HA
16 - 30 of 303