31HA-2KXPN Magic Chef Range - Parts

The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both bake and broil elements, and it can replace both short and long igniters. However, it cannot replace round style oven igniters. If your igni...Read moreter glows for 90 seconds or more without igniting the burner, this means it is too weak to open the valve. The element in your igniter may have shorted it and it might not glow at all, or it might only glow orange or red. It needs to glow white hot; if it cannot get hot enough the gas will not be released from the safety valve and it will be impossible to light the burner in your oven. This kit includes the igniter, ceramic wire nuts, an insulation pad, a metal bracket, a variety of plug ends, and an instruction sheet. The body length is 3 3/4 inches, and the element inside is approximately 1 1/2 inches. This replacement part has an amperage range of 3.3 to 3.6. The element inside this igniter is extremely fragile, do not touch it. Before you start repairing your oven or range, make sure you have unplugged it and shut off the gas supply.

The oven door springs create tension which allows the door to open and close with ease. This spring can be used on either the left or right side of your oven, is made completely of metal, and is approximately 6 inches long. If your oven door will not open or close easily, you may need to replace this part. It may be a good idea to replace...Read more both hinges at the same time, because if a spring has become loose, the other hinge is likely to have the same issue. You may need to remove the side panel of the oven to reach where the spring attaches, so make sure the oven is off and is cool to the touch. This part is sold individually.

This clock knob is just under an inch long. It is black in color and is made of plastic. There is a chrome disc of decoration on its top.

This square burner grate has sides measuring approximately nine inches. It is all black in color.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This top burner spark ignition electrode assembly has a body length of just under two inches.

Sold individually.

This surface burner knob is two inches in diameter. It has a chrome bottom and a black plastic top.

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.

The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.